2-axis metal brushless gimbal 2208kv motor, BGC3.0 brushless control panel, suitable forGoPro Hero 3 4 F450 Aerial Photography

Specifcation: Name: CNC metal brushless gimbal Materal: CNC Aluminium alloy Motor: Model 2208 kv80 Brushless motor Control Panel: BGC3.0 Brshless controlpanel Software:BGC2.2 Strap: Gopro camera strap Compatible camera: GOPRO 3 3+ 4 Battery plug type: JST plug/XH-2.54 plug Voltage: 12V/3cell Lipo battery Compatible model: DJI phantom Ⅰ, Ⅱ and otherDIY drones Notes: 1. Recommended power supply for the gimbal is12V.(3cell lipo battery) 2. The gopro camera must fasten on the gimbal(Not any loose, this is very important) 3. Adjust the gopro camera left or right, let thecamera almost at level. 4. Please do not power on the gimbal until theGopro camera is fixed on the gimbal. How to install: 1. Remove the damping balls, open the top coverof the mounting plate. 2. Install the top cover of the mounting plate tothe bottom of the DJ phantom. 3. Install the damping balls. 4. Install your GOPRO camera,and fasten it with straps.   Advanced setup 1. Install JAVA Virtual machine.(http://java.com/zh CN/download/installed.jsp) 2. Install CP2102 USB driver for xp/win7.3. Connect from the gimbal controller to computerby mini usb.4. Open the “SimpleBGC GUl.exe”, the vesion isBGC2.2 b2. (http://vww.basecamelectronics,com/downloads/8bit/) 5.Select the right com ports. 6. Adjust the values of the parameters.(The PID value is very important. The defaultROLL P 10, I 0.15, D 12, the default PITCH P10,I 0.25, D 15) 7. The default assign actions to menu key ofPCB(1 click: Calibrate ACC. 2 clicks: Calibrate Gyro.3 clicks: Set tilt angles by hands.) Note: If the green LED light flash, means you must calibratethe ACC and Gyro.