NeilMed Sinus Rinse NasaDock Dry Dock Stand 1 Each

Heading Physician developed. Purpose Dry Dock Stand Manufacturer Neilmed Prod Directions Screw Mounting Method: Use the printed template on the side of the box to mark location of holes for the mounting screws. You may use tip of the screws to mark your points. For dry wall mounting, drill a pilot hole in each of the marked positions using the appropriate size drill bit. Now tap in the anchor with a hammer. Using a Phillips screwdriver or electric drill, drive the screw into each anchor until approximately 1/8 inch is still protruding out of the wall. You may mount the provided screws directly in to the wooden stud at each location and in this case do not use the anchors. Now affix the unit to the wall siding using the two keyholes at the back of the unit. Double-Sided Tape Mounting: Using the provided double-sided tape, peel the protective layer off one side of the tape and adhere it to the back of the unit. Clean and dry the area where the holder is going to be mounted. Make