Creatbot D600 Pro Dual Extruder 3D Printer

Introduction: The CREATBOT D600 is truly an impressive manufacturing machine. Its super large and completely closed Build space of 600 x 600 x 600 mm is perfect if you like to process advanced filaments like PEEK, Ultem, Nylon, PC, or other thermoplastics that need high-temperatures (for example ABS). The D600 Pro is an industrial high-temperature 3D printer with very high manufacturing quality and enormously large heated Installation space (60x60x60 cm). The all-metal frame always offers you smooth running, precise linear guidance of the extruder, and enormous noise reduction. Features: The industrial linear guide rail is key to high manufacturing quality. Completely enclosed construction chamber for stable temperatures and noise reduction. Manufacturing temperature up to 260°C hotend(left) and 420°C hotend(right). Hot air chamber can provide constant room temperature so that model won’t deform when printing. Dry filaments like Nylon, PC, ABS, which with high water absorption, 45°C and 65°C chamber temperature available. The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space. The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly.  Perfect for additive production with high-performance thermoplastics. CreatBot D600 Pro improvements over D600: 25 control points check the setting of the building platform and level it automatically. Precise linear guide rail for stable and smooth running. Power failure protection automatically remembers the last position and continues 3D printing. Heated building platform made of glass and BuildTak adhesives. Easy control via the 4.3-inch touch screen. The construction chamber heated to 70 degrees minimizes warping. Filament drying chamber for nylon and other hydrophilic filaments. Manufacturing temperature up to 260°C hot-end(left) and 420°C hot-end(right). High precision 3D printing – up to 0.05 mm. Stable installation space made of steel guarantees reliable results. Very large installation space of 600 x 600 x 600 mm. Completely enclosed construction chamber for stable temperatures and noise reduction. Perfect for additive production with high-performance thermoplastics.