JL825A - HPE FlexNetwork 5140 48G POE+ 2SFP+ 2XGT EI Switch
The HPE FlexNetwork 5140 EI Switch Series delivers scalability, high availability, and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise-class QoS and security, Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, and IPv6, and delivers energy savings with Energy Efficient Ethernet. Specifications: I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports; Duplex: Ports 1-48 support 10BASE-T/100BASE-TX, 1000BASE-T (full only) 2 SFP+ fixed 10GbE ports 2 x 1/2.5/5/10GBASE-T Additional ports and slots 1 RJ-45 Serial Console Port Memory and processor 512 MB SDRAM, 256 MB flash Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately) Physical characteristics Dimensions 17.32(w) x 12.6(d) x 1.72(h) in. (44 x 32 x 4.36 cm) (1U height) Weight 13.23 lb (6 kg) Performance 1000 Mb latency < 5 µs 10 Gbps latency < 3 µs Throughput 131 Mpps Routing/switching capacity 176 Gbps Routing table size 1024 entries MAC address table size 16,384 entries IPv6 Ready Certified Environment Operating temperature 23°F to 122°F (–5°C to 50°C) Operating relative humidity 10% to 90%, noncondensing Non-operating/storage temperature –40°F to 158°F (–40°C to 70°C) Non-operating/storage relative humidity 5% to 95%, noncondensing Acoustic Low-speed fan: 43.5 dB, High-speed fan: 52.8 dB; ISO 7779 Electrical characteristics Frequency 50/60 Hz Maximum heat dissipation 117.7/1467 BTU/hr (124/1547.77 kJ/hr) AC voltage 100 VAC–240 VAC Maximum power rating 430W Idle power 34.5W PoE power 370W PoE+ Notes Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; RoHS Compliance Emissions FCC Part 15 Subpart Class A; ICES-003 Class A; VCCI-CISPR 32 Class A; EN 55032 Class A; AS/NZS CISPR 32 Class A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 Immunity Generic ESD EN 55024 EN 300 386 Management IMC—Intelligent Management Center; Smart MC, command-line interface; web browser; SNMP Manager