Super ATV POLARIS RZR 800 HIGH CLEARANCE 1.5" FORWARD OFFSET A-ARMS

Get Room for Bigger Tires You want bigger tires to tackle bigger obstacles, but you don’t want a lift that’s hard to handle and makes you feel unstable. You need SuperATV’s High-Clearance 1.5” Forward Offset A-Arms for your Polaris RZR 800. They increase your wheel base by 1.5 inches, so you get more stability, room for up to 29.5” tires, and more strength than stock. It will make your ride better. More Clearance—No Lift Required The dual-bend design of our A-arms gives you 1.5 inches of additional ground clearance so you can cruise over obstacles easily. But they also have a 1.5” forward offset which gives you clearance for 29.5” tires. That longer wheelbase gives you increased stability on hills and other big obstacles. Upgrading to that tire size gives you even more ground clearance and enables some wild off-road action. Made Stronger We don’t mess around when it comes to strength. Our arms are made with 1.25” diameter steel tubing. That’s 25% larger than stock and gives it a huge boost in strength. All around, these A-arms are made to ride hard for years. Adjustable Camber These A-arms come with adjustable pivot blocks that are set to factory specs out of the box. If you don’t want to mess with them, you don’t have to. But if you add weight to your cab or get a small lift, they give you the ability to adjust your camber for a better ride and less premature wear. Learn more about what camber is, how it affects your ride, and how to adjust it perfectly. Let SuperATV Do the Work - Preassembly Available! Minimize downtime and get riding quicker by ordering a set of SuperATV ball joints with your A-arms. We’ll install them free of charge so you’ll save time and money. You’ll spend less time in the garage and more time behind the wheel. NOTE: You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout. Super Duty 300M Ball Joints We combined unbeatable 300M alloy steel with our advanced ball joint design to bring you the strongest ball joint you can get. They’re adjustable and serviceable so you can can maintain your preferred stud stiffness for years of use. Altogether it’s 2.25 times stronger than stock, so it won’t break under stress. It can’t be beat. Keller Ball Joints Keller Ball Joints use a two-piece design that eliminates the need for a snap ring. They thread onto your A-arms like a nut and bolt, which makes these ball joints virtually impossible to pull out. The high-quality chromoly steel stud combined with an advanced tool-steel body makes them perfect for bigger machines, bigger tires, and bigger rides. And since they’re greaseable and rebuildable, you can keep them running perfectly. Heavy Duty Ball Joints Our heavy-duty ball joints are no pushover. They’re made with 4340 VAR steel and zinc plated to make them strong and durable. The adjustable housing allows you to maintain the perfect stiffness in your ball joint even after years of wear. It’s also easily greasable so you can keep it running smooth. It’s a long-lasting ball joint that’s built for action. Standard Duty Ball Joints Standard duty ball joints give you OEM quality without the OEM price. The hardened chromoly construction is zinc plated for strength and longevity. The result is a high-quality ball joint that’s as stronger or stronger than stock. Industry Leading Adjustability SuperATV A-Arms feature the industry leading adjustable upper ball joint allowing for full camber adjustment. Unlike others, our arms allow you to custom tailor your ride to fit your individual needs. Add a lift, new shocks, or larger tires and eliminate premature tire wear, often caused by misalignment, and keep the ride quality you want. All-Inclusive Kit SuperATV provides an all-inclusive kit containing extended tie rod ends ($50 value). As you move your A-arms forward, you also need to adjust the toe on your steering rack. Don't be fooled by spacer or shock relocation kits, the only way to correctly utilize full thread engagement and maintain factory steering alignment is to use our extended tie rod ends. They are an invaluable feature that also gives you the capability to optimize your alignment after the addition of a lift kit or different suspension. A Steering Stop Kit ($24.95 value) is added as well to prevent over steering which would create unneeded bind on your axles. Let SuperATV Do the Work - Preassembly Available! Want more time on the trails and less time in the garage? Purchase a set of SuperATV ball joints and we will install them for you. You save money and time. No need to buy a press, or remove your old ball joints, and press them back in. We'll do all the work for free! The best part? This saves you considerable time and money! And, the labor is on us! We do it because we want you on the trail, not in the garage. Choose the Right Ball Joint Each Super Duty and Heavy-Duty ball joint comes with an easily accessible grease zerk and an adjustable steel on steel design. You can easily keep our ball joints maintained and flexible. At SuperATV, we understand the importance of strength and longevity. Super Duty 300M Ball Joints 300M grade steel is the strongest ball joint material on the market. We took that material and combined it with our superior design engineering to make the strongest stud possible. That means minimal narrowing at the neck and an adjustable stud. At 2.25x stronger than stock, you can't buy a stronger ball joint than SuperATV’s super duty 300M ball joint. Heavy-Duty Ball Joints Our heavy-duty ball joints are designed with ultimate performance and convenience in mind. Whether you’re doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc plating means this ball joint can take it. Our tests show that our ball joint can take double the pressure of an OEM ball joint! NOTE: You must re-use your stock ball joints if you don’t select preassembly. --> WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.⚠ California Proposition 65 Warning ⚠WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.Polaris RZR 800 : 2008-2014 TERMS OF WARRANTY SuperATV offers premium products and extends one of the industry's best warranties to go with them. Each A-arm carries a Lifetime warranty against manufacturing defects to the original purchaser, for the period and subject to the terms stated on our Warranty Policy page. Ball joints and tie rod ends are considered wear and tear items and do not carry a Lifetime Warranty.For complete warranty details see our Warranty Policy page. TERMS OF WARRANTY SuperATV provides the finest A Arms in the market and offers a LIFETIME WARRANTY to go with it. If for any reason an arm bends, breaks, or fails we will replace it free of charge. Whether you pile it up or your buddy took it for an innocent test ride, we've got you covered. Ball joints and tie rod ends are considered wear and tear items and do not carry a lifetime warranty. Please note: All SuperATV products are warrantied to the original purchaser. How to make a warranty claim? Before sending anything to SuperATV, please click below to fill out the appropriate form: Warranty Returns Complete the form, ensuring each field is properly filled out. Follow instructions on each page for the warranty or return process. Customer is responsible for shipping item back to SuperATV and is responsible for tracking information. Please keep until a SuperATV team member has contacted you. Custom/special orders, including A Arms with Pre-Installed Ball Joints, are returnable and will be assessed a base restocking fee of 25%.-->