Super ATV CAN-AM DEFENDER HD10 ATLAS PRO 1.5" REAR OFFSET A-ARMS
Do More with More Suspension Driving in rough terrain is one thing. Pushing your Defender to its limits in rough terrain is another. Can your stock A-arms keep up? We know our Atlas Pro 1.5” Rear Offset A-Arms can. Their tubing is bigger and better, measuring 1.5” in diameter. They’re also 0.5” larger than stock and 0.25” larger than our standard A-arms. They amplify your clearance, making your rig look big, bad, and powerful. Plus, they come with a 1.5” offset. And if you want to run 31” tires all the way around, you can add our 2” forward offset A-arms. Atlas Pro Tubes Are Badass These Atlas Pro A-arms are large and beefy. They’re the biggest A-arms we have ever designed. The enlarged 1.5” diameter tubing will turn heads. And while you’re on the trail, it gives you the strength you need and the reliability you count on. Half an inch bigger than stock may not sound big, but the difference is huge when it comes to A-arms. Plus, we finish them with a UV-resistant powder coating to increase durability and corrosion resistance. Rear Offset = More Stability The design of these Can-Am Defender HD10 control arms gives you an additional 1.5" of ground clearance, allowing you to ride over stumps and rocks you’d pass up in the past. And they come with a 1.5” rear offset, adding length to your wheelbase by moving the ball joint 1.5" backward. The offset allows you to run up to 31” tires without adding a lift kit. The trail is at your mercy with larger tires, more ground clearance, and a 1.5” offset. We're so confident in our A-arms that we're selling them with a lifetime warranty. So ride how you want, knowing we've got your back. Adjustable Pivot Blocks Our high-clearance A-arms also come with adjustable pivot blocks, giving you the ability to change your camber. It’s important when adding a lift kit or larger tires that you pay attention to your camber to eliminate premature wear and tear on your tires. To keep the stress off you, we’ve also pre-adjusted your pivot blocks to match your machine's stock specifications, so you don’t have to mess with them if you don’t want to. WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.⚠ California Proposition 65 Warning ⚠WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. Can-Am Defender HD 10 DPS : 2020+ Can-Am Defender HD 10 XT : 2020+ Can-Am Defender MAX HD 10 DPS : 2020+ Can-Am Defender MAX HD 10 XT : 2020+ Can-Am Defender 6x6 DPS : 2020+ Can-Am Defender 6x6 XT : 2020+ Can-Am Defender Pro DPS : 2020+ Can-Am Defender Pro XT : 2020+ NOTE: Does NOT fit LTD, Lonestar, or XMR models. TERMS OF WARRANTY SuperATV offers premium products and extends one of the industry's best warranties to go with them. Each A-arm carries a Lifetime warranty against manufacturing defects to the original purchaser, for the period and subject to the terms stated on our Warranty Policy page. Ball joints and tie rod ends are considered wear and tear items and do not carry a Lifetime Warranty.For complete warranty details see our Warranty Policy page. TERMS OF WARRANTY SuperATV provides the finest A Arms in the market and offers a LIFETIME WARRANTY to go with it. If for any reason an arm bends, breaks, or fails we will replace it free of charge. Whether you pile it up or your buddy took it for an innocent test ride, we've got you covered. Ball joints and tie rod ends are considered wear and tear items and do not carry a lifetime warranty. Please note: All SuperATV products are warrantied to the original purchaser. How to make a warranty claim? Before sending anything to SuperATV, please click below to fill out the appropriate form: Warranty Returns Complete the form, ensuring each field is properly filled out. Follow instructions on each page for the warranty or return process. Customer is responsible for shipping item back to SuperATV and is responsible for tracking information. Please keep until a SuperATV team member has contacted you. Custom/special orders, including A Arms with Pre-Installed Ball Joints, are returnable and will be assessed a base restocking fee of 25%.-->