PCAN-MicroMod Analog 2
Please note: The product is only available in smaller quantities. Unfortunately, larger quantities can no longer be produced. Please see the PCAN Micromod FD series for new projects. The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs. CANopen® firmware is available for all PCAN-MicroMod motherboards. The motherboards Analog 1 & 2 support general analog requirements. Features Tech Specs Documents Downloads Completely configurable using the Windows® software PCAN-MicroMod Configuration Software low pass filter can be adjusted by means of configuration (1 - 1000 ms) Communication through high-speed CAN Operating voltage 11 - 30 V Aluminum casing with spring terminal connectors. Optional DIN rail fixing option available Extended operating temperature range from -40 to 85 °C (-40 to 185°F) 8 analog inputs with the following properties: Bipolar measurement range +/-10 V Resolution 16 bit Sample rate depends on the number of used cahnnels (2 kHz/n) Protection against under- and overvoltages 4 analog outputs with the following properties: Voltage range 0 - 10 V (based on 12-bit DAC) Output current 20 mA per channel Short-circuit protection Power Supply Operating voltage: 11 - 30 V DC (±5 %), 8 - 30 V w/o AOutCurrent consumption: max. 200 mARipple 5 V: < 50 mV (Ub = 12 V, 200 mA load)Ripple analog: < 20 mVReverse-polarity protection: extant; can get ineffective by the wiring with other CAN nodes (danger of destruction of electronic components) Analog Inputs Count: 8Measuring range: -10 - +10 V, other measuring range on requestResolution: 16 bit, 0.3125 mV/digitSource impedance: < 500 kΩOvervoltage protection: extantLow-pass time constant τ: Hardware: 1 ms, Software: 1 - 1000 ms (optional by configuration) Analog outputs Count: 4Type: DAC-basedVoltage range: 0 - 10 VResolution: 12 bitCurrent output: 20 mA Short circuit protection: extant CAN Transmission standard: High-speed CAN ISO 11898-2, typ. 500 kbit/s, setup with PCAN-MicroMod Configuration (Windows software)Termination: noneCAN ID reserved for configuration transfer: 0x7E7Module number at delivery (for configuration transfer): 0 Peculiarity Interference Immunity Tests: compliant to IEC 61000 and DIN EN 61326Surge: ±500 V (specification industrial sector: ±1 kV) [see User's Manual for more details]Line-conducted HF compatibility: 10 Veff (specification: 3 Veff) Dimensions 55 x 68 x 24 mm, see User's Manual for more details - Casing size (incl.connectors) Weight 108 g Operating temperature -40 - +85 °C (-40 - +185 °F) Storage temperature -40 - +100 °C (-40 - +212 °F) Relative humidity 15% to 90% (non-condensing) Ingress protection (IEC 60529) IP20 EMC DIN EN 61326-1:2008-06, EC directive 2004/108/EG PCAN-MicroMod Analog 1 manual User's Guide in English PCAN-MicroMod Analog 2 manual User's Guide in English PCAN-MicroMod CANopen® firmware manual CANopen Firmware Manual in English PCAN-MicroMod package Package for PCAN-MicroMod, PCAN-MicroMod Evaluation board, and the PCAN-MicroMod motherboards. The package includes the configuration software PCAN-MicroMod Configuration, the latest PCAN-MicroMod and the CANopen® firmware, all files for development, and documentation (German and English). PCAN-MicroMod Configuration Configuration software for PCAN-MicroMod products for Windows® 11 (64-bit), 10 (32/64-bit). PEAK-Flash Easy-to-use tool for updating the firmware of PEAK-System hardware products as well as CAN and LIN adapters for Windows® 11 (64-bit), 10 (32/64-bit). PCAN-Flash (outdated) Windows® software for updating firmware via CAN. The development on PCAN-Flash is no longer continued. Please use PEAK-Flash instead.