HydroLogic® Evolution-RO™ Dry Membrane

HydroLogic® Evolution-RO™ Dry Membrane Use the Evolution-RO1000 RO Replacement membrane when your flow rate decreases or your PPM increases. The RO membrane will remove 98%+ of PPM of Total Dissolved Solids. About this item NEW AND IMPROVED Ultra-Efficient Dry Membrane Reduces 95%+ of total dissolved solids (TDS) 20% Increased Flow Rate Filters 600+ gallons per day (GPD) Replace between 6 months–2 years Flow rates of RO systems are based on source water @ 65 psi / 77° / 500 ppm RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output. If you would like to know the TFC specifically for your wanted output, check out our TFC chart. Replacement Directions: Lube the two small o-rings on the stem of the membrane with silicone lubricant. Discard all water to drain for 1 hour prior to use. Two are needed for Evolution systems.