LORD Maxlok T18 MX 4:1 Ratio Medium Set 18-24 min Acrylic Adhesive non-sagging, and resistance to temperature

LORD Maxlok MX/T18 is a non-sag acrylic adhesive that is temperature and environmentally resistant. Maxlok MX/T18 performs at temperatures from -40 to +149°C and cure begins immediately once the adhesive and accelerator are mixed. Features and Benefits: Versatile – bonds a wide range of unprepared metals with minimal substrate preparation. Temperature Resistant – performs at temperatures from -40 to +300°F (-40 to +149°C). Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure. UL Rated – Maxlok MX/T6 adhesive system is UL 746C certified. Precise Bondline – allows precise control of adhesive bondline thickness due to its content of glass beads, 0.01″ (0.025 cm) diameter. Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility Typical Use: Replace riveting, welding and other mechanical fastening methods in a range of temperature environments One or Two Component: Two Component Mixed Appearance: Gray Paste Cure Time: 24 hours Working Time @ 25°C: 18-24 minutes Flash Point: 15°C Elongation: >10% Viscosity @ 25°C: 70,000 to 220,000 cP Temperature Range: -40°C to +149°C Tack Free Time: 48 to 72 minutes Shelf Life: 9 months