RCF P1108T 8" Two-Way Weatherproof Loudspeaker
8" Two-Way Weatherproof Loudspeaker The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required. In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5" diaphragm assembly compression driver loaded on a 1" rotatable constant directivity 90x60CD horn with a 8" high efficiency low-frequency transducer with a 1.5" voice coil. The cabinet is equipped with 4 x M 8 brass inserts and a steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).Features: 100 W RMS Weatherproof cabinet IP 55 Aluminium grill and stainless steel bracket One 8" high-output LF transducer with 1.5" voice coil One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil 90 x 60 constant directivity horn 2 x 15 enclosure sides for cluster configurations PTC Driver Protection LICC (Low Impedance Compensated Crossover) network 2 metres 4 x 1.5 Input cable Specifications: ACOUSTICAL SPECIFICATIONS Frequency Response -10 dB: 80 Hz / 20 kHz Max SPL @ 1m: 121 dB Horizontal coverage angle: 90 Vertical coverage angle: 60 Directivity index; Q: 11 System Sensitivity: 95 dB Nominal Impedance: 16 Ω Power Handling: 100 W Peak Power Handling: 400 W Recommended Amplifier: 200 Protections: Dynamic protection on Compression Driver Crossover frequencies: 2200 Hz TRANSDUCERS Compression Driver: 1" throat, 1.5" coil diaphragm assembly Nominal Impedance: 8 Ω Input Power Rating: 20 W AES Sensitivity: 107 dB Woofer: 8" woofer, 1.5" voice coil Nominal Impedance: 16 Ω Input Power Rating: 100 W AES Sensitivity: 94 dB INPUT SECTION Input connector: 4 x 1.5 mm square 2 m Neoprene cable Constant voltage transformer: 70/100 Power Selection: 70V/30W, 15W - 100V/60W, 30W CABINET Cabinet Material: 8 mm Polyethylene rotomoulded Hardware: 4 x M8 + U-Bracket and Pair of spacers Grille: Custm perforated aluminium grille with open-cell fiber and water repellent woven fabric backing Colour: Grey PHYSICAL SPECIFICATIONS Height: 266/10.47 mm/inch Width: 493/19.40 mm/inch Depth: 250/9.84 mm/inch Net Weight: 12,5/27.55 kg/lbs