RDL TX-TPS6A Passive Single-Pair Sender Twisted Pair Format-A
www.performanceaudio.com

RDL TX-TPS6A Passive Single-Pair Sender Twisted Pair Format-A

$119.16
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Performance Audio

View Store

Passive Single-Pair Sender - Twisted Pair Format-A - Balanced Audio Line Input The TX-TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One low-impedance +4 dBu balanced line-level audio source connects to the module using the detachable terminal block. A studio-quality transformer provides isolation between the audio source and the RJ45 OUTPUT. The TX-TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the front-panel switch during installation. This module drives only one cable pair, therefore a LOOP IN RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to the LOOP IN jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The TX-TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The TX-TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to the LOOP IN jack, that power is passed through to the modules connected to the OUTPUT jack.Features: Single +4 dBu Low-Impedance Balanced Audio Input Input on Detachable Terminal Block Switch Selects which RJ45 Pair (A, B or C) is Fed Signal and Power Pair Pass-Through from LOOP IN Jack Passive Circuitry Does Not Require Power Galvanic Isolation through a Studio-Quality Transformer Daisy-Chain with Single-Pair or Two-Pair Format-A Senders Specifications: Input:Low-impedance Balanced; Recommended source impedance < 150 Ω Input Connection:Detachable Terminal Block (Balanced) Input Level:+4 dBu balanced; +22 dBu Max Format-A Signal Pair Used:Switch-selectable A, B, or C Format-A Input:RJ45 LOOP IN Output:RDL TP Format-A Output Connection:RJ45 Frequency Response:20 Hz to 20 kHz (+/- 0.1 dB) THD+N:< 0.035% (50 Hz to 20 kHz, +4 dBu); < 0.1% (20 Hz to 20 kHz, +4 dBu) Headroom above +4 dBu:> 18 dB CMRR:> 85 dB (50 Hz to 150 Hz) Power Requirement:Passive Dimensions:3.0" (7.6 cm) W; 1.6" (4.08 cm) H; 2.09" (5.3 cm) D Ambient Operating Environment:0 C to 50 C

Show More Show Less