RDL RU-VDA4B NTSC/PAL Video Distribution Amplifier 1x4 BNC

NTSC/PAL Video Distribution Amplifier - 1x4 - BNC The RU-VDA4 is the ideal choice in most applications where video signals need to be distributed. Video inputs and outputs are made on the front panel via BNC, PHONO, or type F jacks. Power connections are made using full-size barrier block terminals on the rear panel. The RU-VDA4 has two jacks in the input stage. One jack is for the input signal; the other is a loop through output of the source signal.The input stage is bridging. If 75 Ω termination of the input signal is required, the termination is plugged onto the LOOP OUT jack. Gain is user adjustable from the front panel. The GAIN potentiometer allows adjustment from -1 dB to +7 dB.Features: Video Distribution with 4 Outputs Adjustable Gain Amplification Input LOOP OUT Jack Video 1 Volt Signal Indicator 10 MHz Bandwidth, NTSC or PAL 1/3-Rack, High-Density Rack Mounting Specifications: Input: 1 kΩ bridging 75 Ω line Gain: -1 dB to +7 dB (0.9 to 2.25 V p-p, adjustable) Outputs: 1 LOOP OUT from input signal; 4 amplified outputs Output Level: 1 V p-p into 75 Ω Frequency Response: 10 Hz to 10 MHz (+/- 0.2 dB) Noise: < -70 dB below (1 V p-p) Output Isolation: > 40 dB Differential Gain: 0.1% Differential Phase: 0.1 degree (measured at 10% and 90 APL) Connector Type: BNC, PHONO, or Type F Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 60 mA Ambient Operating Environment: 0 C to 55 C