RDL FP-UBC2 Unbalanced to Balanced Converter 2 Channel

Unbalanced to Balanced Converter - 2 Channel The FP-UBC2 is the ideal choice for connectorized conversion from unbalanced to balanced audio. This module features two identical channels. Gold-plated phono jacks are utilized for each unbalanced input channel. Each output is balanced, connected through an XLR jack. A gain trim potentiometer is provided for each channel. The normal gain setting is indicated for the trimming potentiometer. This setting produces a +4 dBu balanced output for a -10 dBV unbalanced input. The gain is adjustable -5 dB to +10 dB from the normal gain. Therefore, a +4 dBu output signal is possible from input signals ranging from -20 dBV to -5 dBV.Features: Stereo Unbalanced to Balanced Audio Conversion Connectorized Audio Converter Output Level Trim Low-Noise and Low-Distortion Conversion Cabinet, Shelf or Rack Mounting Convenience of RDL FLAT-PAKs Specifications: Amps per FP-UBC2: 2 identical circuits (stereo or dual mono operation) Gain: -5 dB to +10 dB (adjustable relative to +4 dBu output for -10 dBV input); (separate controls for each channel) Input Level: -20 dBV to -5 dBV (for +4 dBu output) Input Impedance: 10 kΩ Input Configuration: Unbalanced Output Impedance: 150 Ω balanced, drives 600 Ω or 10 kΩ lines Output Configuration: Balanced or unbalanced Frequency Response: 20 Hz to 40 kHz (+/- 0.25 dB) THD+N: < 0.05%; typ. 0.01% (1 kHz) IMD: < 0.02% Output Level: +4 dBu Headroom: > 18 dB (at rated output level of +4 dBu) Noise: < -85 dB referred to +4 dBu (20 Hz to 20 kHz) Crosstalk: Better than 70 dB (20 Hz to 20 kHz); < -80 dB (typ. 1 kHz) Power Requirement: GROUND-REFERENCED, 24 Vdc @ 50 mA Dimensions: Height: 1.29 in. 3.28 cm Width: 3.25 in. 8.26 cm Length: 4.07 in. 10.34 cm Ambient Operating Environment:0 C to 55 C