RDL FP-SPR1 SPDIF Repeater / Amplifier

SPDIF Repeater / Amplifier The FP-SPR1 is the ideal product for applications requiring either conversion between SPDIF connector types or recovery of low SPDIF signal levels. Power connections are made using either the full-size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules. The FP-SPR1 is a single-channel module featuring three separate inputs. An input is provided in each conventional SPDIF format: BNC, phono and optical. Any one of these inputs may be used. A coaxial input has priority over the optical input. Three output jacks are also provided: BNC, phono and optical. Either of the coaxial jacks may be used and/or the optical output may be connected. It is possible to use only one of the three outputs or use one coaxial and the optical output simultaneously. A front-panel SIGNAL LED illuminates when an input signal of sufficient amplitude is received to produce the correct output from the module.Features: Correct SPDIF Signal Level from Long Line Conversion Between SPDIF Connector Types BNC, Phono and Optical Inputs BNC, Phono and Optical Outputs Reshape SPDIF Waveforms Virtually Jitter-Free Performance Convenience of RDL FLAT-PAKs Specifications: Inputs (3):75 Ω BNC coaxial, 75 Ω phono coaxial, optical Input Level:100 mV to 2.5 V p-p (coaxial) Outputs (3):75 Ω BNC coaxial, 75 Ω phono coaxial, optical Output Level:500 mV p-p (coaxial) Frequency Range:28 kHz to 48 kHz Indicator (1):Signal present LED Jitter:< 200 pS (input signal 200 mV p-p or greater), < 1 nS (input signal 100 mV p-p) Power Requirement:GROUND-REFERENCED, 24 Vdc @ 80 mA Note: May operate from 12 Vdc in standalone installations Dimensions:Height: 1.34 in. 3.40 cm Width: 3.25 in. 8.26 cm Length: 2.82 in. 7.16 cm Ambient Operating Environment:-10 C to 55 C