RDL EZ-MPA1 Microphone Preamplifier (USA Power Supply)
www.performanceaudio.com

RDL EZ-MPA1 Microphone Preamplifier (USA Power Supply)

$209.77
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Performance Audio

View Store

Microphone Preamplifier - Stereo Output with Compressors - Includes North American Power Supply The EZ-MPA1 is a microphone preamplifier with front-panel volume control and audio level metering. A front-panel switch engages an audio compressor to control overloads and clipping during high level audio bursts or peaks from the microphone. Dynamic or condenser microphones are both supported with rear-panel switchable phantom voltage. The preamplified mic signal feeds both channels of the line output on RCA or MINI jacks. LED VU metering facilitates easy level adjustment. The EZ-MPA1 is ideal to add microphone inputs to mixers and amplifiers with line inputs. It is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and commercial sound systems. Model numbers:EZ-MPA1 includes power supply with North American plugEZ-MPA1X includes worldwide power supply (specify plug)Features: Balanced Microphone Input on Rear-Panel XLR Switch-Selectable Phantom on Rear Panel Unbalanced Output on MINI or RCA Rear-Panel Jacks Preamp Feeds Left and Right Output Channels Front-Panel Compressor Enable/Disable Switch Audio Compressor Controls Overloads Front-Panel LEVEL Control Dual-LED VU Meter Optimized for Dynamic or Condenser Mics Headroom Accomodates High Input Levels Headroom Increases with Lower Gain Settings Compressor Limits Clipping Over Wide Dynamic Range Specifications: Input: 1.2 kΩ balanced on XLR jack, mic-level, -11 dBu max. Level control: Off to 50 dB gain Outputs (2): -10 dBV nominal on RCA jacks or Mini jack, +16 dBV max. without compression, -4 dBV max. with 20 dB compression Frequency Response: 80 Hz to 40 kHz (+/-1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter) THD+N: < 0.1% (35 Hz to 20 kHz, -50 dBu input) Compression: 20 dB range, switch-selectable CMRR: > 55 dB (20 to 20 kHz) Metering: Dual-LED VU Meter, calibrated to -10 dBV output Phantom: Switch-selectable 24 V (IEC 1938: 1996-12) Noise: < -65 dB (below -10 dBV output, -50 dBu input) 24 Vdc power supply current: 55 mA (idle), 80 mA (max.), 100 mA (max. with phantom) Case dimensions: 5.75" (14.6 cm)W x 3" (7.6 cm)D Mounting size: 1/3 rack width

Show More Show Less