Radial Engineering J33 Turntable Preamp and Direct Box

RIAA Turntable Preamp and DI for Dynamic Phono Cartridges The Radial J33 is a combination phono preamplifier and purpose built stereo direct box made to handle the rigors of the professional recording studio and the abusive environment of live touring. But don't let the tough exterior fool you... the J33's sonic performance will easily surpass many audiophile preamps costing much more. Designed specifically for dynamic cartridges, the J33 begins with a low noise front end. Inputs are standard RCA with the required turntable ground lug. A precise RIAA low pass filter is tailored to produce a smooth, warm response. The signal is then buffered to provide the audio system with a standard -10dB signal with choice of RCA connectors for compatibility with home HiFi entertainment systems, 3.5mm (1/8") output to feed a laptop or iPod, or a stereo TRS 1/4" jack for an audio recorder. A second set of direct box XLR outputs deliver a mic level signal to feed a concert snake, mic splitter and mixing desk preamp inputs. A rumble filter is also available for high sound pressure environments to reduce bothersome resonant feedback. As with all Radial DIs, the J33 features a 14 gauge steel enclosure with a unique book-end design that creates a protective zone around the switches and connectors. The internal I-Beam construction ensures maximum rigidity while ensuring minimal stress on the sensitive solder joints. These combine to provide exceptional shielding against noise while ensuring greater dependability in the most demanding environments. The Radial J33, a high performance turntable preamp that is ideally suited for music playback, archiving, DJing and sampling.Features: Combination RIAA Phono preamp and DI box Stereo RCA, 1/4" TRS, 3.5mm and XLR outputs Built-in low frequency rumble filter Choice of 48V phantom or DC supply Specifications: Specifications Specifications are subject to change without notice. Audio circuit type: Active circuit Frequency response: RIAA response curve for phonographic playback Signal to noise ratio: Dynamic range: 91 dB Noise floor: -82 dBu @ 0 dBu output Equivalent input noise: Maximum input: -30 dBu @ 1kHz Nominal Input: -50 ~ -40 dBu @ 1kHz Total harmonic distortion: 0.002% @ 1kHz (-33 dBu input level) Inter-modulation distortion: 0.025% @ -45 dBu input Input impedance: 47k Ohms, unbalanced Output impedance: XLR out: 600 Ohms; 1/4", 3.5mm, RCA outs: 470 Ohms Features LED power LED:: Two indicators illuminate when power is applied Low-Cut filter: -3dB @ 100Hz (rumble filter) XLR configuration: AES standard (pin-2 hot) General Construction: 14 gauge steel chassis and outer shell, baked enamel finish Size: Size: 5" x 6.25" x 2" (127 x 159 x 51mm) Weight: 2.80lbs (1.28 kg) Power: +48V phantom or +15VDC/400mA external supply (included) Warranty: Radial 3-year, transferable