C2G High Speed HDMI Cable with Ethernet - 4K 60Hz (15')
Connect a 4K enabled device with an HDMI output to the HDMI input of a monitor, projector or HDTV to display audio and video content up to a 4K resolution The Select High Speed HDMI Cable with Ethernet supports all HDMI 2.0 features and is the perfect solution for connecting multimedia source devices in home theater, desktop or commercial audio video applications requiring high speed HDMI features. The CL2 rated cable jacket is designed to meet the requirements for in-wall installations. The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection. This fully-functional, high bandwidth cable is tested to perform at industry standards and is backed by a lifetime warranty. Note: Both the source device and display must support a HDMI feature in order to pass that feature through this cable. To utilize HDMI stacking for network equipment all attached equipment must use the same firmware.Features: Experience the latest HDMI features including: 4K@50/60, (2160p), which is 4 times the clarity of 1080p/60 video resolution 3D video, Deep Color and x.v. Color Dolby True HD, DTS-HD Master Audio and up to 32 audio channels for a multi-dimensional immersive audio experience Up to 1536kHz audio sample frequency for the highest audio fidelity Simultaneous delivery of dual video streams to multiple users on the same screen Simultaneous delivery of multi-stream audio to multiple users (up to 4) Support for the wide angle theatrical 21:9 video aspect ratio Dynamic synchronization of video and audio streams CEC extensions for control of consumer electronics devices through a single control point Specifications: Color: Black Length: 15.00 Foot Jacket Rating: Standard Non-Rated UPC: 757120506126 Warranty: Lifetime Vendor: C2G Weight: 0.448 LB HDMI Specification: 2.0 Electrical Characteristics Nominal Velocity of Propagation - 10.2Gbps DC Resistance - 300V Dielectric Strength - AC 500V/minute Insulation Resistance - 100# Nominal Attenuation - 300kHz-825MHz - >5dB, 825MHz-2.475GHz - >5dB, 2.475GHz-4.125GHz - >12dB, 4.125GHz-5.1GHz - >20dB HDMI (3D, Deep Color, x.v.Color, Dolby True HD, and DTS-HD Master Audio), Full 1080p resolution 4K@50/60, (2160p), which is 4 times the clarity of 1080p/60 video resolution 3D video, Deep Color and x.v. Color Dolby True HD, DTS-HD Master Audio and up to 32 audio channels for a multi-dimensional immersive audio experience Up to 1536kHz audio sample frequency for the highest audio fidelity High bandwidth (340 MHz/10.2 Gbps) for high speed data transfer HDMI-CEC system control compatibility HDMI Ethernet Channel (when used with HDMI Ethernet channel supported source and sync equipment). Physical Characteristics Voltage Rating - 30V Minimum Bend Radius - 60° Temperature Rating - 80°C Operating Temperature Range - -20° - 80°C Storage Temperature Range - -25° - 85°C Approvals - RoHS Compliant Package Type - Polybag Conductor 1 (5 pair) Conductor Type - 30AWG (7/0.10), Tinned Copper Insulation - Foamed PE SKIN, Red/White, Brown/White, Blue/White, Green/White, Black/White, O.D. - 0.8mm Drain Wire - 30AWG (7/0.10), Tinned Copper Shield - Aluminum Foil, 100% Coverage Conductor 2 (4 conductors) Conductor Type - 30AWG (7/0.10), Tinned Copper Insulation - HDPE, Yellow, Red, Green, Purple, O.D. - 0.6 Overall Cable Drain Wire - 30AWG (07/0.10), Tinned Copper Foil Shield - Aluminum Foil, 100% Coverage Braided Shield - 16/4/0.12, Al/Mg Jacket - PVC, Black, O.D. - 6.0 ± 0.2mm Connectors (2) Connector Type - HDMI - Type A Pin Construction - Phosphor Copper Plating - 1µm Gold Dimensions (HxWxL) - 10.0 x 20.1 x 37.1mm