[Option] Shoulder strap

[Online Store Limited Items] Shoulder strap for smartphones. Both ends have hook fittings for easy attachment and removal. It can be attached to shoulder cases with ring holes, It can be attached to our design cases (regular hard cases or impact-resistant cases) by attaching the ring-hole metal fittings. If the case is an impact-resistant case, it can be attached by inserting a strap holder between the case and the strap holder. (*We do not carry strap holders. *Please do not select the metal fitting attachment option when using the strap holder. [Strap color] Ivory Black Beige gold (Slightly shiny) Pink (Slightly shiny) Convenient for going out and adjustable length. It can be worn around the neck, diagonally across the body, or over the shoulder. The size can be adjusted to fit each individual, so both short and tall people can use it with peace of mind. It is a unisex design that can be used by both men and women. 137cm-80cm (including the length of the hook fitting) [Please note] ◎Each color + metal fitting attachment ◎Hardware attachment only If you choose the above, please be sure to purchase together with the design case. *The metal fittings cannot be attached to the shoulder case (case change option). If your order cannot be attached, the order will be cancelled. *Hardware can be attached to the standard hard case (no option) and the impact resistant case (case modification option). The hardware will be attached to the bottom of the case purchased together. *Punch a hole and thread a small black screw through the back so the screw will be in contact with the phone body. If you are concerned about this, we recommend that you put a protective sticker (tape, etc.) on the screws to prevent them from scratching your phone. Please note that the design cannot be applied to the metal fitting part, so the design arrangement may be partially changed. [About the position of the metal fittings] The metal fittings are attached by making a hole about 1cm from the bottom of the case. *If it is lower than this, there is a possibility that it will interfere with the installation of the case. Metal fitting size: approx. 6*10*4mm (width*length*thickness) Round can: 11mm in diameter *The color of the case in the photo is clear. *The actual color may look slightly different depending on the specifications of your display or monitor. *There is a possibility of discoloration or peeling off of the paint if used for a long period of time due to age-related deterioration or ultraviolet rays. *The straps and metal fittings are manufactured overseas. Although we inspect them at the time of shipment, please allow for small scratches and stains that do not pose a problem in terms of use. *We cannot guarantee the effects on the main body of the smartphone caused by the metal fittings. *The metal fittings may discolor or peel off the plating due to perspiration or moisture. Please wipe off any moisture with a soft cloth, etc. when it comes into contact with the strap. *Please note that some straps may have some wrinkles because they are sent folded, but they are not defective.