SS-30RM2 - 30 Amp Dual Unit Rack Mount Switching Power Supply

Rack mount version of our popular regulated switching power supply. Dual 30A power supplies. Machined metal panel for 19" racks, 2U high. Powerpole outputs in front and 1/4" binding posts in rear. DC output voltage 14.1V at 25A continuous, 30A surge. The SS-30RM2 Rack Mount Dual Switching Power Supply is designed to supply 25 Amps continuous and 30 Amps surge (up to 5 minutes) at 14.1 VDC. Loads can be connected to either the rear binding posts or the front Powerpole connectors. Any output may provide up to 30 Amps individually, and the total output is limited at 30 Amps. Features Front Connections: 2 sets of Powerpole connectors Rear Connections: 1/4 inch binding posts that also accept banana plugs, ring terminals or compression connections Illuminated Power Switch SpecificationsElectrical specifications: Input Range: 100-120 VAC or 200-240 VAC, 50/60Hz (Switchable) Output Voltage: 14.1 VDC fixed Output Amperage: 25 continuous, 30 surge Internal Protection: Thermal, over current Internal Input Fuse: 6.3 Amps at 115 VAC Ripple Peak-to-Peak Max. <100mVpp Noise Peak-to-Peak Max. <100mVpp Operating temperature rating: 0 – 50 °C Storage temperature: -20 – 85 °C Physical dimensions and materials: Overall Dimensions: 6.1 x 19 x 3.5 in (154mm long, 483mm wide, 89mm tall) Fan: Quiet internal cooling fan Machined metal case front bezel Certifications Meets FCC CFR Title 47 Part 15 Subpart B: Class B, CISPR: 2005 ANSI C63.4: 2003 Meets CE/LVD (Low-Voltage Directive 2006/95/EC) standard Meets EMC: EN 55022:206+A1: 2007, 2010, EN 61000-3-2:2006 Powerpole ConfigurationThe Powerpole connectors mounted on the front panel conform to the RACES/ARES standard orientation. Input Voltage SelectionThe power supply is set up for 230V AC input as shipped from the factory. For 115V AC applications, set the recessed 115/230 input select switch located on the rear of the power supply into the proper position. Positions are identified on the switch. Use a small screwdriver to slide the switch into position. No adjustment is necessary for either 50 or 60 Hz input. Applications Land mobile radio base stations Communications systems Security systems Automotive & marine systems OEM applications Test equipment Electronic displays 12 Volt lighting systems GPS receivers DC computers Package Contents Rack Mounted Power Supplies (2) AC Power Cords, 4 ft. Turning the power supply onTurn the power supply on by pressing the power switch to the 'ON' Position. Turning the power supply offBefore you turn the power supply off, turn the radio off as described in the user documentation for the radio. Then turn the power supply off by pressing the power switch to the 'OFF' Position. CoolingThe SS-30RM2 power supply is cooled by convection and forced air cooling (normal airflow around the power supply in combination with a temperature controlled fan to improve cooling at higher levels of use). The fan is activated by a sensor when the temperature rises above 70°C.