GEPRC Tern-LR40 HD O3 Long Range FPV - TBS Nano RX
GEPRC Tern-LR40 HD O3 Long Range FPV - TBS Nano RX GEPRC Tern-LR40 HD O3 is the GEPRC family new member: Tern-LR40. This is a 4-inch long range FPV with excellent performance and reliability. It adopts a DC-type structure. Its careful lightweight design uses aviation-grade 7075 aluminum parts. Light and rigid. Equipped with Taker G4 45A AIO flight control, which has higher computing power redundancy. The use of a top-mounted fixed GPS can avoid the impact of its own electromagnetic interference on flight, and the rescue function is more stable.Silicone camera shock-absorbing pad prevents high-frequency jello from O3 camera. The Tern-LR40 is like a bird with spread wings, flying freely through the blue sky without being restrained. Choosing it is not only a high-quality flight, but also an artistic journey. Feature New lightweight design, weight under 249g. Expand interference GPS fixation method and stay away from interference sources DC structure cannot see the propellers during flight, which is more suitable for straight-line aerial photography. Install BB ring to set the battery low voltage alarm Using GEP-M10nano GPS, the satellite search speed is faster and the rescue mode is more stable. Compatible gopro mount installation, expandable shooting creation. Specifications Model: Tern-LR40 Frame: Tern-LR40 Frame Wheelbase: 180mm Top plate: 1.5mm Mid plate: 2.0mm Bottom plate: 1.5mm Arm thickness: 3.5mm FC: Taker G4 45A AIO MCU: STM32G473CEU6 Gyro: ICM 42688-P OSD: Betaflight OSD w/AT7456E ESC: 32Bit 45A VTX: O3 Air Unit Camera: O3 camera Antenna: 5.8G&2.4G Motors: GEP-SPEEDX2 1404 3000KV Connector：XT30 Propellers: HQProp T4X2.5Grey (2CW+2CCW) Tern-LR40 O3 PNP version weight: 180g±5g Receiver: PNP/GEPRC ELRS24/GEPRC ELRS915/TBS Nano RX Recommended battery: LiPo 4S 660mah-850mah/18650 3000mah Flight time: 10-25min Includes 1 x Tern-LR40 2 x HQProp T4X2.5Grey (2CW+2CCW) 2 x battery anti-slip mat 1 x screw pack 4 x Battery strap M15*170mm 1 x L-shaped screwdriver 1.5mm 1 x GoPro camera mount holder 1 x T-type Antenna mount 1 x RC Printed