TANNOY CMS 403ICTE 4" Full Range Directional Ceiling Loudspeaker with ICT Driver for Installation Applications (Blind Mount) (CMS 403ICTE)
TANNOY CMS 403ICTE 4" Full Range Directional Ceiling Loudspeaker with ICT Driver for Installation Applications (Blind Mount) (CMS 403ICTE) The CMS 403ICTE represents a wide bandwidth 160-Watt high-sensitivity loudspeaker integrating our cutting-edge Ceiling Monitor System technology (CMS 3.0). Boasting an innovative 4" ICT (Inductive Coupling Technology) point-source driver with an extended frequency range, this speaker ensures reliable and uniform broadband directivity while significantly improving intelligibility. With ICT drivers renowned for exceptional long-term reliability, this speaker is perfect for continuous-use applications. Adjustable Tilt Angle The CMS 403ICTE features a purpose-built self-aligning 3-way clamp system, ensuring swift, effortless, and economical installation. Its design allows angling towards the listener within the fixed ceiling-mounting ring. By discreetly pivoting the loudspeaker to target the desired coverage area, it adeptly resolves the challenge of speaker placement in less-than-ideal room configurations. Optimised for Installation Equipped with a low-insertion loss 30 W transformer with convenient front panel tap switching, CMS 403ICTE features an integral ABS back-can with removable locking screw terminal connector and loop-thru functionality. The paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. LAB GRUPPEN Ready The CMS 403ICTE is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel. Product Features Full range ceiling loudspeaker for installation applications 40 Watts continuous, 160 Watts peak power 4" ICT (Inductive Coupling Technology) point source driver for extended frequency range Blind Mount enclosure supplied with integral moulded ABS back can Integrated single unit construction for ease of installation Adjustable tilt angle with 360° rotation to accommodate difficult loudspeaker placements High durability design for constant heavy usage in demanding applications Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input Low insertion loss 30 W line transformer with easily accessible tapping switch Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel Semi matt white finish fits unobtrusively in any environment Powder coated UV resistant perforated steel mesh grille with dust protection Removable grille for custom painting Self-aligning 3 way clamp mounting system Mounting C-ring and ceiling tile rails included Specifications Performance Frequency response (-3 dB) <sup>(1)</sup> 110 Hz - 22 kHz Frequency range (-10 dB) <sup>(1)</sup> 80 Hz - 24 kHz System sensitivity (1 W @ 1 m) <sup>(2)</sup> 88 dB (1 W = 4 V for 16 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 120 degrees Directivity Factor (Q) 5.26 averaged 1 kHz to 6 kHz Directivity Index (DI) 6.30 averaged 1 kHz to 6 kHz Power Handling <sup>(3)</sup> Recommended Amplifier Power 80 W @ 16 Ohms Nominal Impedance (Lo, Z) 16 Ohms Rated maximum SPL Transformer Taps (via front rotary switch) Crossover 7 kHz inductively coupled Transducers Dual Concentric point source driver 100 mm (4.00") mineral loaded polypropylene Physical Safety Features Safety ring located at rear of enclosure for load bearing safety bond Clamping Design Min / Max clamping range:0.0 mm (0.0") / 20.0 mm (0.79")Recommended clamp torque: 1.5 Nm Backcan Dimensions Hole cutout diameter 187 mm (7.36") Net Weight (ea) 3.0 kg (6.61 lbs) Included Accessories C-Ring, tile-bridge kit, paint mask, cut-out template, grille Optional Accessories Plaster (mud) ring Packed Quantity 2 1. Average over stated bandwidth. Measured in an IEC baffle in an Anechoic Chamber2. Unweighted pink noise input, measured at 1 metre on axis3. Long term power handling capacity as defined in EIA - 426B testA full range of measurements, performance data, CLF and Ease Data for CMS 403ICTE can be downloaded from www.tannoypro.com.TANNOY operates a policy of continuous research and development. The introduction of new materials or manufacturing methods may introduce variations in actual performance; however, actual performance always will equal or exceed the published specifications, which TANNOY reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.