RCF TTP5-A Active 15" 2-way Point Source Powered Speaker 1600 Watts

RCF TTP5-A Active 15" 2-way Point Source Powered Speaker 1600 Watts The RCF TTP5-A is a professionally designed 15" 2-Way Point Source Array Speaker made by RCF as a bi-amped, high power, active array speaker module carefully engineered capable of delivering high fidelity output intended for use in indoor and outdoor medium and large spaces. The 15" neo woofer is made outfitted along with a 4" voice coil, as is its 2" titanium dome neo c.tweeter driver. The system is designed capable of creating a horizontal or vertical arrays that comes along with a constant curvature, designed for use in medium to small theaters, up to very large outdoor stadiums and public spaces. The RCF newly designed 4" compression driver is carefully designed capable of projecting a pattern control of 22.5° x 60° and that's because to its waveguide horn, a big thanks to that. The high powered 15" neodymium woofer that comes along with its 4" voice coil is designed capable of creating a very controlled and precise bass response intended for use in indoor applications such as theaters. A T-pole design is capable of generating minimized amounts of flux modulation, and a dual-forced air venting system is capable of assisting in voice coil ventilation designed for minimum power compression and higher power handling and longer speaker life. The integration of the 1600 Watt, 2-way digital amplification and the digital processing capable of minimizing the noise, distortion and increases thermal efficiency. The TT5-A comes equipped along with an input board which is featuring XLR In/Out, Gain reduction, Speaker presets, Time Delay, a RDNet bypass switch, an RDNet ready option, 4 status LEDs, and a Powercon In/Out. The TT5-A also features 96 Khz, 32 bit DSP processing and a dedicated networking board. With the use of our proprietary RDNet protocol, it is possible to monitor all the system parameters, from the input to the status of each single amplifier. With the use of a DSP on board of each cabinet, it is possible to address to single cabinets or groups of cabinets, specific presets or modifications of parameters, like gain, equalisation or delay. The RDNet protocol is based on RS-485 communication protocol, and is stable. It is also possible to send and receive data on a simple XLR cable. All new TT+ Two-Way Systems feature a multifunctional rear encoder to control all the speaker functions (Gain reduction, Delay, Speaker presets), even without network connection. The TTP5-A is a professionally designed flexible modular system, and as it is modular, is more easily array-able depending on the size of the event and the required coverage. High quality mechanics with a smart locking system make the set up of the system fast and almost effortless. Applications Theaters StadiumsArenasAuditoriumsLecture hallsTheme parksConference centersBallroomsHouses of worshipLarge railway stations Features 1600 Watt bi-amplified active speaker 22.5 x 60° precision waveguide 96 Khz, 32 bit DSP processing Foam-backed grilles hide the drivers from view for pleasing aesthetics Tour grade cabinet and mechanics RDNet On Board Pole mount cap Specifications Acoustic Specifications Frequency Response 45 Hz to 20 kHz Maximum Sound Pressure Level (SPL) 138 dB Horizontal Coverage Angle 22.5° Vertical Coverage Angle 60° Low Frequency Driver 15.0" neo, 4.0" Voice Coil (38.1 neo, 10.2 cm VC) High Frequency Driver 2.0" neo, 4.0" Voice Coil (5.1 neo, 10.2 cm VC)Me Input / Output Input Signal Balanced / unbalanced Input Connections XLR, RDNet ready Input Sensitivity (Selectable) +4 dBu Output Connectors XLR Processor Section Crossover Frequency 550 Hz Protection Features Thermal, RMS Limiter Soft limiter, dynamic Controls Gain reduction, RDNet local setup/bypass, Time Delay, Presets (Linear, Close, Far listening, High-pass), RDNet Ready Amplifier Specifications Active or Passive Active Total Power 1600 Watts High Frequency Driver 500 Watts Low Frequency Driver 1100 Watts Cooling Convection Connections Powercon in/out Cabinet Material Enclosure Material Baltic Birch plywood Hardware Installation/Rental fittings Handles 2 per side Color Black Physical Specifications Dimensions (H x W x D) 38.81 x 18.03 x 25.43" (986 x 458 x 646 mm) Weight 145.5 lb (66.0 kg)