Presonus CDL18S 18" 2000W Active Flyable, Compact Subwoofer, w/Dante

Presonus CDL18S 18" 2000W Active Flyable, Compact Subwoofer, w/Dante, Integrated Rigging and DSP Control Designed for articulated sub-bass frequency reproduction, the PreSonus CDL18s Dante-Enabled Active Subwoofer is delivering a high-output and controlled performance in sound-reinforcement applications for theater, live stage, clubs, and more. The CDL18s by PreSonus utilizes a 2000W (peak) Class-D amplifier to power the 18" woofer with a 4" voice coil, delivering a frequency response of 42 HZ-150 Hz with a peak SPL of 135 dB. The driver and voice coil offer 7mm of driver travel before reaching over-excursion. The 15mm eucalyptus plywood enclosure is coated a powder-coated steel grille, with a Chemline polyurea finish and offers XLR input and output with polarity invert. The PreSonus CDL18s easily ground stacks for simplified deployment and up to two subs may be flown with five CDL12 full-range tops for a complete line-array/point source sound system. Tight, coherent low-end 18" woofer with 4" voice coil 2000W peak Class-D amplifier XLR input with XLR direct output 7mm driver travel before over-excursion Chemline polyurea finished eucalyptus plywood enclosure with powder-coated steel grille Integrated rigging hardware for easy deployment of fly-rigs and ground stacks Two handles for ease in transport Optional caster kit and CDL rigging kit available Specifications PreSonus CDL18S Specs PA Speaker Configuration: Active Subwoofer Total Power Capacity: 2000 W Peak1000 W Program500 W RMS Drivers LF Driver: 1 x 18" / 45.7 cm Woofer LF Voice Coil: 4" / 10.2 cm Magnet: Ferrite Performance Frequency Range: 20 Hz to 20 kHz36 Hz to 144 Hz -10 dB Frequency Response: 42 Hz to 150 Hz -3 dB Maximum SPL: 135 dB Max Input Level: +4 dBu I/O Impedance: Input:40 Kilohms THD: <0.05% Protections: DC Fault, Overcurrent, Overvoltage, Thermal, Undervoltage Connectivity Audio I/O: XLR Line InputXLR Output Network I/O: 1 x etherCON (Control) Signal Processing Crossover: 90 Hz EQ: Yes Dynamic Processing: Compression, HF Limiter, Limiter Alignment Delay: Yes Phase Adjustment: Yes Max Sample Rate/Resolution: 48 kHz / 24-Bit Power AC Input Power: 90 to 260 VAC, 50 / 60 Hz  AC Power Connector: 1 x powerCON Input1 x power CON Output Current Consumption: 4.2 A (1/8 Power) Physical Mounting: 1 x M20 (Top) Handles: 2 x Side Cooling: Convection Construction Material: Metal Grille, Plywood Dimensions: 23.2 x 20.8 x 24" / 589.3 x 528.3 x 609.6 mm Weight: 105 lb / 47.6 kg