Martin Audio C8.1T, Ceiling Loudspeaker for Commercial install 8 inch

Martin Audio C8.1T, Ceiling Loudspeaker for Commercial install 8 inch The enclosure is ported to extend the low-frequency performance and the 5-point mounting system ensures that installation is fast and secure. Input and link terminals make paralleling units a simple operation and a steel cover plate protects the input connector against fire. These products comply with UL2043 Fire Tests for Heat & Visible Smoke Release for Discrete Products and their Accessories Installed in Air Handling Spaces. Listed UL1480 General Signalling Speakers. Martin Audio C8.1T Main Key Features  Two-way high-performance flush mounting ceiling speaker 8" (200mm) UL94V-0 carbon fiber loaded polypropylene cone bass Wide dispersion – 90° conical up to 7kHz High & low impedance operation – transformer included 110dB max SPL @ 1 metre (16 ohm) 125-watt power handling (60W through a transformer) Polyswitch and thermal fuse protected Steel backcan UL2043 & UL1480 Specification TYPE  Ceiling mounted, two-way vented enclosure FREQUENCY RESPONSE (5)  80Hz-18kHz ± 3dB -10dB @ 50Hz DRIVER 8" (200mm) UL94V-0 PP bass driver 1" (25mm) dome tweeter RATED POWER (2)  125W AES, 500W peak SENSITIVITY (8)  91dB MAXIMUM SPL (9)  110dB continuous, 116dB peak NOMINAL IMPEDANCE  16Ω DISPERSION (-6DB)  90° conical up to 7kHz CROSSOVER  3kHz passive ENCLOSURE  Steel backcan FINISH Bezel & grille – white UV resistant (Overpaintable) Backcan – zinc plated PROTECTIVE GRILLE  Perforated steel CONNECTORS  Rising clamp plug and socket ACCESSORIES (INCLUDED) 60W 70/100V line transformer Tile rails C bracket Paint mask Cut-out template VOLTAGE TAPS 100V – 60W, 30W, 15W 70V – 60W, 30W, 15W, 7.5W DIMENSIONS  (OD) 354mm x (D) 258mm (OD) 13.9ins x (D) 10.2ins CUT-OUT DIAMETER  308mm (12.14 ins) WEIGHT  6.7kg (14.8lbs)