Lectrosonics SPNDNT DIGITAL MATRIX ROUTER FOR DANTE AND AVB
Description Lectrosonics SPNDNT DIGITAL MATRIX ROUTER FOR DANTE AND AVB In essence, the Lectrosonics SPNDNT is a professionally designed full function DSP mixer and processor like other ASPEN models except that instead of analog I/O ports, it comes using digital network Dante ports. The processor is made for combining Dante networked digital audio that comes along with the ASPEN digital matrix for expanding the signal routing options. The on-board Audinate® Brooklyn II module functions as a native Dante device with the use of standard ethernet or AVB compliant switches. The processor also comes capable of handling the clock synchronization for the ASPEN equipment and the Dante network. If the processor is the Dante master, it is made for generating the clock signal for the network and the ASPEN rack. If the processor is a Dante slave, it is capable of picking up the network clock and passes it on to the ASPEN system below it. Multiple Dante equipped devices will automatically discover one another and configure the Master/Slave relationship. Redundancy, which is required in some applications, is accomplished by connecting to a secondary network that is capable to duplicate real-time audio traffic. If the primary network is failing for any reason, the secondary network’s audio continues without losing even a single sample. Connects Dante™ networked audio with ASPEN processors Up to 32 inputs and 32 outputs from the Dante network operate as native inputs and outputs in theASPEN digital matrix Low latency, tightly synchronized transport of uncompressed audio over IP networks usingoff the shelf switches Simplified configuration management includes easy to use Dante features like automatic device discoveryand plug and play networking Gigabit Ethernet transport AVB Support Redundancy via secondary network Specifications Digital Inputs 32 via Ethernet Digital Outputs 32 via Ethernet Monitor Output 1x 1/4" (6.35 mm) headphone jackSignal Source: Any of the 48 final mixesOutput Power: 50 mW ( Matrix Access 32 inputs from Dante matrix48 mixes in ASPEN matrix Input Processing Gain: -69 to 20 dB in 1 dB incrementsDelay: .5 to 100 ms in .5 ms increments Output Processing Gain: -69 to 20 dB in 1 dB incrementsDelay: .5 to 250 ms in .5 ms increments Crosspoint Mixing Modes AutoDirectOverrideBackgroundPhantom Signal Generator Swept Sine: Modes: single sweep, continuous sweepWaveforms: Sawtooth (up or down), triangleSweep Rate: Linear, logarithmicParameters: Start frequency, stop frequency, level (dBu), sweep time (sec)White Noise: Parameter: level (dBu)Pink Noise: Parameter: level (dBu)Tone (Sine Wave): Parameter: level (dBu), frequency Power Requirement 100-240 VAC, 50/60 Hz Power Consumption 15 W Dimensions (L x W x H) 1.75 x 19.00 x 7.70" (44.4 x 482.0 x 195.0 mm) Weight 3.64 lb (1.65 kg)