JBL CSA240Z 2 x 40W DriveCore Amplifier, Fanless

JBL CSA240Z 2 x 40W DriveCore Amplifier, Fanless By years of working together and combination the long legacy of insight, innovation and inventions from HARMAN brands, JBL® Commercial Series Amplifiers (CSA) go well beyond the expected in producing the best and powerful sound device performers. The JBL CSA240Z Audio Amplifier (2 x 40W) is designed professionally to provide a powerful and compact amplification for installed applications. This utilizes a Crown's DriveCore technology and universal switch-mode power supply to deliver efficient and reliable sound amplification. We continue to set new standards in commercial power amplifier technology since from the switch-mode universal power supply to the efficient performance of Crown’s DriveCore™ Technology The JBL CSA240Z supports both 70 and 100V installations out of the box. To use for the company's CSR-V in-wall volume controls, the 2 x RJ45 connector is already included. Inputs are provided by Euroblock and mono sum RCA connectors. Euroblock connectors provides the outputs. Its knobws are all illuminated for providing visual feedback, clearer visions in darkened areas, and the universal power supply is allowing the amplifier to accept AC voltages from 100 to 240 VAC, 50/60 Hz. The amp also fulfills HARMAN's GreenEdge environmental initiative. Simple to configure, the CS amp provides a DriveCore-based sound solution. This replaces up to 500 parts with one small chip, significantly reducing the part count and increasing reliability while maintaining superb performance. Features 2 output channels with 40W per channel Built-in 70V and 100V Fanless, space-saving 1U design Sleep mode disable function Energy-efficient amplifier Sleek industrial look with illuminated rings making knobs easy to see and use Supports JBL CSR-V wall controller via CAT5 cable with RJ45 connectors Universal power supply Energy Star® Certified Specification JBL 240Z I/O 2 x Mono Sum RCA Pair Input (left and right)2 x Euroblock Input2 x 70/100 V Euroblock connector2 x RJ45 port for CSR-V controller Switch Hi-Z on and off Rated Power Into 4 or 8 Ohms, 1 kHz, ≤0.5% THD: 40W Output Channels 2 Insertion Loss 70 and 100 V outputs: 1 dB maximum Input Sensitivity 1.4 V RMS Frequency Response At 8 Ohms (20 Hz to 20 kHz): ±0.5 dB Total Harmonic Distortion <0.5 % Signal-to-Noise Ratio >100 dB Input Impedance Euro Block: 20 kOhms (balanced) RCA: 50 kOhms Maximum Input Level +22 dBu (Nominal) Crosstalk >70 dB Tone Controls Bass: ±10 dB at 100 HzTreble: ±10 dB at 10,000 Hz Nominal Voltage 100 to 240 VAC, 50/60 Hz Minimum Load Impedance Low-Z Output: 4 Ohms70 V Output: 120 Ohms100 V Output: 240 Ohms Operating Temperature & Humidity 32 to 95°F (0 to 35°C) Storage Temperature -4 to 185°F (-20 to 85°C) Dimensions (W x D x H) 8.6 x 11.9 x 1.7" (218.5 x 303.4 x 43.3 mm) Weight 7.5 lb (3.4 kg)