JL Audio MHD Marine Amplifier 5-Channel Full-Range 900 Watts 12v

JL Audio MHD Marine Amplifier 5-Channel Full-Range 900 Watts 12v

$1,599.99
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}

JL Audio MHD Marine Amplifier 5-Channel Full-Range 900 Watts 12v98226Model: MHD900/55-Channel Class D Marine System Amplifier, 100 W x 4 + 500 W x 1Thanks to its ability to act as a "one-box solution", the MHD900/5 is ideal for installations where space is at a premium and sound quality is the paramount goal.While extremely compact, this amazing amplifier will comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power!Using our Single Cycle Control switching design and R.I.P.S technology, the MHD900/5 delivers 100 W x 4 to its four main channels, plus a very meaty 500W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while the tight power supply regulation keeps distortion down, maximizing sound quality.This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 100 W RMS x 4 Main Channels @ 3 ohms 75 W RMS x 4 Main Channels @ 2 ohms 75 W RMS x 4 Main Channels @ 1.5 ohms 75 W RMS x 4 Main Channels - Bridged @ 8 ohms 200 W RMS x 2 Main Channels - Bridged @ 4 ohms 150 W RMS x 2 Subwoofer Channel @ 4 ohms 500 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 500 W RMS x 1 Subwoofer Channel @ 1.5 ohms 500 W RMS x 1 Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 100 W RMS x 4 Main Channels @ 3 ohms 75 W RMS x 4 Main Channels @ 2 ohms 75 W RMS x 4 Main Channels @ 1.5 oms 75 W RMS x 4 Main Channels - Bridged @ 8 ohms 200 W RMS x 2 Main Channels - Bridged @ 4 ohms 150 W RMS x 2 Subwoofer Channel @ 4 ohms 500 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 500 W RMS x 1 Subwoofer Channel @ 1.5 ohms 500 W RMS x 1 General Specifications Frequency Response (Main Channels) 12 Hz - 28 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 12 Hz - 10 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Main Channels) >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >400 / 50 Hz Damping Factor @ 2 ohms >200 / 50 Hz THD+N @ Rated Power (Main Channels) <0.03% @ 4 ohms THD+N @ Rated Power (Subwoofer Channel) <0.05% @ 4 ohms Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge Accepts up to 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12/24 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 500 Hz Filter Mode(s): Channels 3 & 4 (rear) High-Pass only Filter Slope(s): Channels 3 & 4 (rear) 12/24 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel 30 Hz, Defeatable Remote Level Control Optional (HD-RLC) Remote Level Modes Sub Ch. Only Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.93 in / 49 mm Width 10.74 in / 273 mm Depth 7.85 in / 199 mm Net Weight 6.85 lb / 3.11 kg

Show More Show Less