3M Edge Sealer 3950 1/2 Pint 8oz

This 3M Edge Sealer minimizes the adverse effects of rigorous use or prolonged or severe exposure conditions by providing water and contaminant-tight seal between a graphic film and substrate. It is required for some 3M warranted graphics (refer to the base film's Product Bulletin for details). These products also may be applied even after the applied film shows signs of wear, such as edge lifting, to significantly reduce further wear; however, such an application does not meet the requirements for warranted graphics. The product can be used on decals as well. How to Prepare the Graphic for Edge Sealing: Do not apply edge sealer unless the temperature is above the minimum recommended temperature. Remove any application tape and re-squeegee the edges before applying the edge sealer. Make sure all edges to be sealed are clean, dry, and free of contaminants. How to Prepare Edge Sealer 3950 for Use: To preserve the unused portion of the edge sealer, transfer the desired amount into a