Toggler SNAPTOGGLE® Heavy-Duty Toggle Bolts 304 Stainless Steel Channels (3/16-in x 2-1/2-in)

SNAPTOGGLE heavy-duty toggle bolts carry twice the load in a smaller hole than standard wing anchors. A patented strap design with sturdier straps and smaller ratchet interval adjusts more precisely and snaps off flush to the surface. SNAPTOGGLE heavy-duty toggle bolts do NOT spin when installed with a screw gun and provide superior holding with metal-to-metal fastening. Materials / Finishes Channel: Yellow zinc-plated cold rolled steel or 304 stainless steel Metal Channel is RoHS-Compliant Straps and handle: High impact polystyrene Cap: Translucent polypropylene co-polymer Features and Benefits Strong – up to 2x the load of an old-fashioned wing toggle Solid metal channel resists vibration and shock bolt is centered in channel and positioned for precise installation bolt threads never touch interior surface of hole and so can’t saw through substrate Save time – at least 6 minutes per anchor versus wing toggles Can use a screw gun – anchor does not spin Save money – turn a 2-person job into a 1-person job Use a shorter bolt – no need to carry a wing through the wall Patented strap design with sturdier straps and smallerratchet interval: adjusts more precisely and snaps off flush to wall,ceiling, or floor does not break prematurely pushes aside insulation Smallest installation hole for each bolt size: maintains integrity of wall, ceiling, or floor, strengtheningthe anchoring ends the need to patch an oversized hole [a 1/4" wing toggle requires a 3/4" diameter hole: 50% larger than the 1/2" diameter hole used by the 1/4” SNAPTOGGLE anchor] Installation Drill appropriate size hole. Hold metal channel flat alongside plastic straps & slide channel through the hole. Minimum clearance behind wall: only 1-7/8” Hold ends of straps together between thumb & forefinger and pull toward you until channel rests behind wall. Ratchet cap along straps with other hand until flange of cap is flush with wall. Place thumb between straps at wall. Push thumb side to side, snapping off straps level with flange of cap. Place item over flange. Insert bolt and tighten until snug against item, then stop. Use machine screw or bolt to match thread in metal channel.