Crank Trigger Wheel Kit V1 (Jeep® 4.0L '86-'06)

This is the Original Boosted 4.0s Crank Trigger designed by @AKAxAuto   36-1 Pattern Trigger Wheel for aftermarket engine management systems, such as the MicroSquirt. This is a factory replacement damper with the trigger pattern milled directly into it, negating the need to affix and align a bolt on trigger wheel. After machining, the dampers are rebalanced. Fits AMC/Jeep 4.0L Inline 6 1986-2006 Includes: 36-1 Tooth Machined Damper HALL Effect Sensor with pigtail Black painted Sensor Mount 2x 1/4-20 studs 2x 1/4-20 flange nuts Recommended installation includes relocating two oil pan bolts and studs. Depending on your ECU, a pull-up resistor may be required. This is a resistor that is connected between the sensor power wire and the output signal wire. For installs using a 5V power supply for the sensor, a 1kΩ resistor is required. For a 12V supply, a 2.4kΩ resistor is required. It is important that the sensor ground wire be grounded at the ECU to reduce the risk of interference. An a