DJI Inspire 2 MAPIR Survey 3/2/1 <br/>Tilting Single Camera Mount
NO CAMERA CLIPS INCLUDED: PLEASE ADD ABOVE This mount allows you to easily attach a Survey3, Survey2, Survey1 or GoPro Hero 4/3+/3 camera to the DJI Inspire 2 drone while still keeping the original drone camera installed. Using the two side black thumb screws you can adjust the camera's tilt angle from 0 to 20 degrees (each mark on mount is 2.5 degrees of tilt). For every 5m/s you are flying tilt 5 degrees (so 10m/s = 10 degrees). You can remove the dampening balls and rotate the camera plate 90 degrees if desired. For applications that use the rear underside camera to check for an unobstructed landing area (such as the DJIGO application) you may not be able to tilt the camera more than 7.5 degrees. You can of course select to force landing though with no issues from the mount. For applications that do not use the ground sensors for landing (such as DroneDeploy) you can use any tilt you require. Included: (1) Durable & lightweight plastic mounting plates (2) DJI Inspire2