Reverse Light Indicator Switch Kit M&M Shifter

M&M Shifter reverse light switch installation     Disconnect battery cable to ensure no electrical problems occur Remove 8 Allen screws (7/64) to have access to the base of the shifter Use (5/32) Allen and remove side plates Remove 10/32 screw from shift lever (Picture 1) Install supplied 10/32 screw 1” and tighten Install supplied switch and mount to the base with supplied ¼-20 cap screws in specified location (picture 2) Some applications air cylinder will need to be clocked for clearance of the air relief port Install the wiring connectors supplied in kit Install weather pack to reverse light wires (hot wire and power to light) Reassemble and check for proper engagement (minor adjustments may be necessary using the slotted holes in mount) Once final adjustments are made reassemble shifter and be sure to tighten all bolts/screws (do not over tighten)       If lights require more than 15amp use the supply wire to trigger a relay that can supply sufficient power to the lights It is recommended to install fuse in line of power to switch