Ortur Laser Master 2 Laser Engraver Cutting Machine

Main Features: [Advanced firmware] Ortur laser master firmware, smarter, faster, more accurate and easier to use. Professional motherboard with 32-bit MCU. It can preprocess 32 instructions, support up to 921600 baud rate, more powerful! The engraving speed can be as high as 3000 mm/min. (If the laser engraving result is not considered, the moving speed can be as high as 1000MM/S) [Smaller focus spot] The focus of the LU2-4 (20w) laser module is smaller because of it. It is the second-generation FAC laser module, the focal point is only 0.08*0.15mm, and the focal area is about a quarter of the first-generation 0.23*0.23mm. So he can cut through 3mm plywood and 6mm pine board at a time. [Safety protection] Active Position Protection There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser; When