Avigilon Alta H5A Multisensor Camera - 3MP - 3 Head

Product Specifications Image Performance Image Sensor 3.0 MP / 5.0 MP: 1/2.8” CMOS Active Pixels 3.0 MP: 2048 (H) x 1536 (V) (4:3)5.0 MP: 2592 x 1944 (4:3)4K: 11520 x 2160 (16:9) 3 x Image Sensor, Max Resolution 3.0 MP: 6144 (H) x 1536 (V) (4:3)5.0 MP: 7776 x 1944 (4:3)4K: 3840 x 2160 (16:9) 4 x Image Sensor, Max Resolution 3.0 MP: 8192 (H) x 1536 (V) (4:3)5.0 MP: 10368 x 1944 (4:3)4K: 15360 x 2160 (16:9) Sensor Aspect Ratio 3.0 MP: 4:35.0 MP: 4:34K: 16:9 IR Illumination - Optional (high power 850 nm LEDs) 30 m (98 ft) maximum distance at 0 lux when camera is mounted at 4 m (13 ft) off the ground Minimum Illumination 3.0 MP / 5.0 MP: 0.020 lux (F1.5) in color mode 0.018 lux (F1.5) in mono mode 0 lux with optional IR illuminator4K: 0.020 lux (F1.5) in color mode 0.016 lux (F1.5) in mono mode 0 lux with optional IR illuminator Dynamic Range HDR On: 120 dB, true HDR, dual exposureHDR Off: 80 dB 3D Noise Reduction Filter Supported Maximum Frame Rate 60 Hz / 50 Hz 3.0 MP: 30 / 25 fps5.0 MP: 24 / 25 fps4K: 17 / 16 fps Image Control Image Compression Method H.264, Motion JPEG Electronic Shutter Control Automatic Iris Control Fixed Day/Night Control Automatic Flicker Control 60 Hz, 50 Hz White Balance Automatic Privacy Zones Up to 64 zones Lens (per image sensor) Focal Length 3.3 - 5.7 mm Lens and Horizontal Field of View Based on Aspect Ratio 3.0 / 5.0 MP: 53° - 99° (4:3)4K: 58° - 106° (16:9) Lens and Vertical Field of View Based on Aspect Ratio 3.0 / 5.0 MP: 39° - 69° (4:3)4K: 32° - 55° (16:9) Aperture Range F1.5 - F1.9 Control Fixed Iris, Remote Focus and Zoom Network Network Gigabit Ethernet, 100BASE-TX, 1000BASE-TX Cabling Type CAT5E Connector RJ-45 ONVIF ONVIF® compliance Profile S, Profile T, Profile G, and Profile M Security Password protection, HTTPS encryption, signed and encrypted firmware Protocols IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv3, ICMP, DHCP, Zeroconf, HSTS Streaming Protocols WebRTC, RTP/RTSP/UDP, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP Platform Compatibility Avigilon Alta Aware, Avigilon Unity ACC, 3rd party VMS Auxiliary I/O Audio Compression Method G.711 PCM 8 kHz, Opus Audio Input/Output Line level I/O External I/O Terminals Alarm In, Alarm Out Mechanical Dimensions Surface Mount: 304 mm x 114 mm (11.95" x 4.48")In-Ceiling Mount: Overall: 298 mm x 161 mm (11.75" x 6.33"); Below Mounting Surface: 298 mm x 64 mm (11.75" x 2.52")Pendant Mount: With Wall Arm: 385 mm x 262 mm x 299 mm (15.15" x 10.30" x 11.77"); With NPT adapter: 299 mm x 248 mm (11.77" x 9.76") Weight Surface Mount: Mount: 950 g (2.1 lbs); Bezel: 1250 g (2.8 lbs); Camera Module (4 lenses): 1590 g (3.5 lbs); Optional IR Illuminator Ring: 670 g (1.5 lbs)In-Ceiling Mount: Mount: 1100 g (2.4 lbs); Bezel: 490 g (1.1 lbs); Camera Module (4 lenses): 1590 g (3.5 lbs)Pendant Mount: Wall Mount: 1190 g (2.6 lbs); NPT Adapter Mount: 470 g (1.04 lbs); Pendant: 1680 g (3.7 lbs); Bezel: 1250 g (2.8 lbs); Camera Module (4 lenses): 1590 g (3.5 lbs); Optional IR Illuminator Ring: 670 g (1.5 lbs) Body Aluminum Finish Cast, Anodized and Powder Coated, Pantone 427C Electrical Power Consumption Surface Mount: With IR: 52 W with 24 VDC, 74 VA with 24 VAC, 51 W with high power PoE (PoE++); Without IR: 26 W with 24 VDC, 37 VA with 24 VAC, 25.5 W with IEEE 802.3at Type 2 (PoE+)In-Ceiling Mount: 26 W with 24 VDC, 37 VA with 24 VAC, 25.5 W with IEEE 802.3at Type 2 (PoE+)Pendant Mount: With IR: 52 W with 24 VDC, 74 VA with 24 VAC, 51 W with high power PoE (PoE++); Without IR: 26 W with 24 VDC, 37 VA with 24 VAC, 25.5 W with IEEE 802.3at Type 2 (PoE+) External Power 24 VDC ± 10 %; 24 VAC rms ± 10 %, 50 or 60 Hz PoE Surface & Pendant Mount: With IR: 60 W (PoE++): IEEE 802.3bt Type 3, Cisco® UPoE or legacy high-power PoE*, Up to 35% IR Power or without IR: 30 W IEEE 802.3at Type 2 (PoE+)In-Ceiling Mount: 30 W IEEE 802.3at Type 2 (PoE+) Redundant Power Seamless failover between PoE and Aux and back without interruption in camera operation Environmental Operating Temperature Surface & Pendant Mount: -40 °C to +60 °C (-40 °F to 140 °F)In-Ceiling Mount: -10 °C to +50 °C (14 °F to 122 °F) Storage Temperature -30 °C to +70 °C (-22 °F to 158 °F) IR Illumination Behavior Surface & Pendant Mount: The IR illuminator will operate at 100% power from -40 °C to 44 °C (-40 °F to 111 °F). The IR power will reduce to 60% from 44 °C to 53 °C (111 °F to 127 °F). The IR illuminator will turn off when the temperature is greater than 53 °C (127 °F). Hysteresis: 6 °C (10.8 °F).For 25.5 W PoE+, the IR illuminator will operate at only 35% power and will turn off if the temperature is below -26 °C (-15 °F).In-Ceiling Mount: not available Humidity 0 - 95% non-condensing Certifications Certifications/Approvals UL, cUL, CE, ROHS, RCM, BIS, UKCA, NOM, KC Safety Standards UL 62368-1, CSA 62368-1, IEC/EN 62368-1UL 2043 (Plenum); IEC/EN 62471 Environmental Standards/Ratings Electromagnetic Emissions Standards Electromagnetic Immunity Standards NEMA TS2 NEMA TS2 paragraph 2.2.7 - 2.2.9 Analytics Rules Supported Object in Area Rule triggered when an object of the selected type and attributes is detected in the region of interest. Object Loitering Rule triggered when an object of the selected type and attributes loiters in the selected area for the selected period of time. Objects Crossing Line Rule triggered when an object of the selected type and attributes crosses the line. The line can be unidirectional or bidirectional. Object Counting Rule triggered when the count of objects of the selected type either exceeds or is less than the selected threshold. Object Line Crossing Counting Rule triggered when the specific number of objects of the selected type either cross a line to enter or leave an area. License Plate Detection Requires additional license. View less ↑ View more > Product Resources Product Datasheet