Sublimation Slides

SLIDE SANDAL SUBLIMATIONSupplies needed:- sublimatable substrate (sandal flap)- sublimation transfer- teflon or scratch paper- repositionable spray- needle-nose pliers or screwdriverHeat press settings:- temperature - 390 degrees F- dwell time - 50 seconds- pressure - mediumNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the heat press brand and model ink and paperand atmospheric conditions.2nd Note: To adhere the transfer to the substrate use repositionable spray.3rd Note: It is important to hang the rubber knobs of the flap off the side ofthe press. The rubber knobs will melt if put in the press.Layer the press from the bottom pad to the top heat platen as follows:1. teflon sheet or scratch paper2. substrate3. transfer4. teflon sheet or scratch paperSteps:1. Spray the transfer with re-positionable spray.3. Position the substrate onto the transfer.4. Place the transfer and substrate in the press with the rubber knobs hangingof