T600-SE02/ SC02 with integrated driver OEM Peristaltic pump
Product Features Compact size and structure, utilizing a NEMA 23 stepper motor with an integrated driver. SE02- Control the pump through digital signals, analog signals and pulse signals. SC02- Communication control of the pump via the RS485 interface (supporting the Modbus RTU). Compatible with various peristaltic pump heads with a wide flow range. Technical Parameters Parameters T600-SE02-01/ T600-SC02-01 Motor type Stepper motor Control circuit board Yes Max. flow rate(Single Channel) ≤3000mL/min Pumphead model No (to be ordered separately) Pump speed ≤600rpm Control mode SE02- DIP switch，4-20mA，0-5V，0-10V，0-10kHz SC02- RS485，Modbus RTU or Longer OEM protocol Control feature Pump speed，start/stop，direction Dimensions(L x W x H) 143x102x118(mm) Installation method Panel mount or soleplate mount Power supply DC24V/15W Operating temperature 0℃-40℃ Relative humidity ＜80% Weight 1.29kg Technical Specifications T100-SE02-01/ T100-SC02-01 T300-SE02-01/ T300-SC02-01 T600-SE02-01/ T600-SC02-01 Pump Speed 0-100rpm 0-300rpm 0-600rpm Speed resolution 0.1rpm 1rpm 1rpm Running direction control Pump running direction is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for clockwise, contact closed for counterclockwise. Start/stop control Start/stop is controlled by a switch signal (dry contact signal). The trigger mode can be configured via communication commands to either level trigger or pulse trigger. Factory default setting: level trigger mode, contact open for start, contact closed for stop. DIP switch setting for pump speed The DIP switch can set the pump speed to 0-100rpm, and each DIP position corresponds to a step of 5rpm. The DIP switch can set the pump speed to 0-300rpm, and each DIP position corresponds to a step of 10rpm. The DIP switch can set the pump speed to 0-600rpm, and each DIP position corresponds to a step of 20rpm. External signals for pump speed The pump speed will be proportional to the external speed signal: 4-20mA, 0-5V, 0-10V, 0-10kHz. The relationship between the signal range and speed range can be configured through communication commands. RS485 interface, supporting both Modbus RTU protocol and Longer Pump OEM protocol. Control the pump speed, start/stop, running direction, and prime status (full speed) via communication commands. And the pump status when power up can be configured. Output DC5V 100mA Power supply DC24V/15W DC24V/45W DC24V/55W Dimensions(L*W*H) 121x102x118(mm) 143x102x118(mm) Mounting method Panel mount or soleplate mount Working condition Temperature: 0℃-40℃, relative humidity＜80% Weight(without pump head) 1.29kg 1.61kg Compatible Pump Head and Tubing Pump Head Tubings Max Flow Rate(mL/min) T100-SE02-01 Max Flow Rate(mL/min) T300-SE02-01 Max Flow Rate(mL/min) T600-SE02-01 YZ1515X,YZII15 13#，14#，19#，16#，25#，17#，18# 380 1100 2200 YZ2515X 15#，24# 270 800 1600 YZII25 15#，24#，35#，36# 500 1500 3000 FG15-13 13#，14#，19#，16#，25#，17#，18# 430 1200 2400 FG25-13 15#，24# 320 1100 2200 DMD15-13-B DMD15-13-D 2x13#, 2x14#, 2x19#, 2x16#, 2x25# 375 1035 2070 BZ15-13-A 14# 22 75 150 BZ15-13-B 16# 80 230 460 BZ15-14-C 25# 150 480 960 BZ15-14-D 17# 270 800 1600 BZ25-13-B 24# 250 800 1600 DG15-24 16#，25#，17# 300(Single Channel) 900(Single Channel) 1800(Single Channel) DG15-28 13#，14#， ID≤3.17mmW.T. 0.8-1mm 75(Single Channel) Not Recommended Not Recommended DG-(1,2,4,6,8) 6 rollers ID≤3.17mm W.T. 0.8-1mm 48(Single Channel) Not Recommended Not Recommended DG-(1,2,4) 10 rollers ID≤3.17mm W.T. 0.8-1mm 32(Single Channel) Not Recommended Not Recommended BPH01 13#，14#，19#，16#，25# 80 240 530 Dimensions Flow Curve