Climacell Environmental Chambers

Overview The CLIMACELL® was specifically developed for exact standards in reproducing environmental conditions with a temperature range from 0°C – 100°C (ECO: -10°C up to 100°C, EVO -20°C up to 100°C optional). Controllable Humidity from 10 – 95% in 1% increments. Applications include, stability testing, packaging, food or chemicals, pharmaceutical stability and ICH, seed germination studies, plant cell or tissue cultures and insect cultures. The Climacell offers an alternative to expensive testing chambers and testing rooms. The Fuzzy logic microprocessor allows for controllable levels of humidity. When equipped with a VIS or UV lighting system uniformity parameters for test and growth conditions is exceptional. Features: Inner volume: 111, 222, 404, 707 and 1212 liters Working temperature: From 0°C up to 100°C (without humidity); from 10°C to 95.0°C (with humidity) Refrigerant: R134(R449a Medium for humidity development: demi water Humidity range: 10%-95% RH Microprocessor-controlled system of humidification/dehumidification Inner glass door Inner chamber: Stainless steel DIN 1.4301 (AISI 304)Patented forced convection air system for precise uniformity achieved with vertical & horizontal air flow ECO Line Features: Intuitive control Microprocessor controller enabled with Fuzzy logic algorithm Multi-language communication includes: English – French - Spanish Acoustic and visual alarm LED indicator of device functions LCD display - 3 inches (7.6 cm) FSTN display, using COG technology Adjustable display contrast depending on device placement Exceptionally wide-angle vision Large display is visible at a distance Display of conditions (ex. temperature, humidity) during operation are enlarged for easy viewing Soft-Touch keyboard surface Mechanical key response Symbols integrated directly in the keyboard Keyboard can be locked against unauthorized access Real time programming and cycling Integrated datalogger for temperature and relative humidity measurement & recording, exportable via USB Optional – Ramping to set the rate of temperature change  EVO Line Features: Intuitive control Microprocessor process control w/Fuzzy logic Multi-lingual communication includes: English – French - Spanish Acoustic and visual alarm LED indicator of device functionality LCD display – 5.7 inches (14.5 cm) Graphic displaying of a new program Color touch screen with icons navigation Touch display password protected from unauthorized Multi-level administrator control (corresponding to FDA 21 Part 11) Data coding to protect the data (according to FDA 21 Part 11) Up to 100 programs and up to 100 segments for each program Programming of temperature ramps, real time and cycling Annual data recording in graphic and numeric form Data export in online and offline mode Pre-set service program diagnostics Easy service diagnostics including remote access SD memory card, USB Host and RS 232 Connection: WiFi, USB Device or Ethernet interface with proper IP address for remote data transfer, control and diagnostics - optional Key Attributes Cu ft. 3.92, 7.84, 14.27, 24.97, 42.8 Max Temp 99.9°C Min Temp Ambient -10°C Temp Uniformity ± 0.5°C to 1.5°C Interior Outlets No Alarms Yes Datalogging Capable Yes Warranty (years)  2yrs parts, 1 yr labor Site Floor Weight (lbs) 242 to 617   Manufacturer Specifications Note: All technical data is related to 22°C ambient temperature and +/ - 10% voltage swing (if specified). For other parameters see section: Electrical connections. Temperature & humidity variation occur in the case of consistent air flow during operation. No more than 50% of the shelf should be filled in order to facilitate uniform air circulation in the chamber FAQ Do I need a water line to connect the Climacell to? A direct water line connection is optional. It has a built-in reservoir that can be hand-filled, or you can connect a water supply to the steam generator via an included barbed fitting. If you are connecting a water supply, the line pressure must be less than 10 psi. Note that any water used in the Climacell should be RO or DI water, with conductivity between 15 - 25 µS. Ultra-pure water cannot be used or it will cause corrosion. Tap water also should not be used as it may cause deposits of impurities to build up.