BRC-10 Recirculating Chiller

Overview The BEING BRC Series cooling/heating recirculating chillers provide continuouslyreliable and stable laboratory temperature control for a wide range of applicationslike medical diagnostic equipment, rotary evaporators, vacuum systems, plasmaetching, laser etching, and jacketed reactors, to name a few. Features: Designed so that test results are in line with international standards DIN 12880. PID temperature controller with LCD screen provides accurate and reliable temperature control. Automatic calibration function, be able to adapt to a variety of laboratory environments. Wide range of options to meet a variety of experimental needs. Temperature/Capacity/Liquid Flow/Pressure/Control Mode/Internal Circulation/External Circulation. Convenient design for easy maintenance Round curved inner angle is easy to clean. Inner chamber is made from corrosion-resistant mirror stainless steel. Preset On/Off function. Built-in power interruption protection function, automatic run after power interruption. Independent over-temperature protection meets DIN 12880 International standard requirements. Temperature deviation alarm. Over-current protection alarm. Key Attributes Type Chillers Incubation No Refrigeration Yes Temp Range (°C) ﹣20℃～20℃ Capacity (L) 13L Circulation External Only Brand Being MaxFlow Rate (l/min) 17 Temp Stability (°C) ±2°C Timer No Alarms Yes Digital or Mechanical Digital Data connection N/A Tank Material Stainless Steel Sample Agitation No Media Racks Available No Warranty (years) 2 Weight (lb) N/A Width (in) N/A Depth (in) N/A Height (in) N/A Manufacturer Specifications Storage Tank (L) 15.5 Liquid （L） 13 Lowest Temp Without Load (℃) –20℃ Temperature Range (℃) –20℃ to 20℃ Temperature Stability (℃) ±2℃ Cooling capacity（W）@20℃ 1800 Cooling capacity（W）@10℃ 1500 Cooling capacity（W）@0℃ 1400 Cooling capacity（W）@-10℃ 1000 Cooling capacity（W）@-20℃ 500 Refrigerant R410A Whole unit power（W） 1300 Power Requirement 115VAC / 60Hz Electrical Plug Type NEMA 5-15 Safety Features Delay, leakage, overcurrent, overvoltage Pump type DC Magnetic Drive Vortex Recirculating Pump Power（W） 60 Pump Flow Rate（L/min） 17 Max. Pump Head（m） 15 Pump Max. Pressure (psi) 22 (152KPa) Inlet/Outlet Tube OD（mm） Ø12 (DN15) Inlet/Outlet Fitting Type Push-to-connect Feet / Caster Locking Casters Noise (dB) ≤55 Liquid Tank (H x W x D) (mm) 270 x 240 x 240 Exterior (H x W x D) (mm)  400 x 500 x 739 Net Weight（kg） 60 Liquid tank Dimension（mm） 240 x 200 x 170 Exterior Dimension（mm）(Excluding casters) 400 x 500 x 739 Supported Rotavaps（Capacity x Units） 5L x 2 or 10L x 1 SKU Number BRC15110U FAQ The specifications show the lowest temperature without load for the BRC-10A Recirculating Chiller is -20°C, but also says it has 1000 W cooling capacity at that temperature? Can it hold -20°C with a load on it? Being states that under their testing the BRC-10A chiller is 60% efficient at -20°C, so it would be able to maintain -20°C with a load of no more than 600 W. -20°C will be the lowest temperature with or without load, as it is the lowest setpoint temperature for the chiller.   How is the power specification for the whole chiller lower than the maximum cooling capacity? This specification is given as a normal operating power consumption. The actual power consumption will vary based on usage and may be significantly higher in demanding applications.