BEING BIC Series Cooling Incubators

Overview BEING Cooling Incubators allow users to carry out applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Each cooling incubator uses environmentally friendly refrigerants that ensure rapid cooling does not come at the expense of the environment. Features: Performance and Features Temperature Range: -10℃ ~80℃ . P.I.D temperature controller provides accurate and reliable temperature control. Natural convection heating allows the sample temperature to be uniform, suitable for sterilization, powder drying and high temperature storage. Extended Life Silicone Rubber Gasket provides excellent sealing and long service life, but is easily replaced when the time for replacement is needed. The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps. Up to 9 programs can be saved. Convenience Inner chamber is made from corrosion-resistant mirror stainless steel. Round curved inner angle is easy to clean. Anti-skid shelf design, easy to operate by single hand. Safety Auto Start Feature after power loss/return . Temperature deviation alarm. Over temperature set point alarm. Over current protection alarm. Independent Over-temperature protection meets DIN 12880 International standard requirements provides you double protection. Key Attributes Cu ft. 2.4-8.9(model dependent) Max Temp 80°C Min Temp -10°C Temp Uniformity ± 1°C at 25°C Interior Outlets No Alarms Yes Datalogging Capable No Warranty (years) 2 Site Floor Weight (lbs) 187, 220, 264 Manufacturer Specifications Model BIC-60 BIC-120 BIC-250 Chamber Volume 2.4 cu ft (68 liters) 4.24 cu ft (120 liters) 8.9 cu ft (252 liters) Temperature Range 14~176℉ 14~176℉ 14~176℉ Display Resolution 0.1 0.1℉ 0.1 Temperature Resolution 0.1℉ 0.1 0.1℉ Temperature Uniformity ±1.8℉ ±1.8℉ ±1.8℉ Temperature Variation High:±0.54℉ High:±0.54℉ High:±0.54℉ Low:±0.9℉ Low:±0.9℉ Low:±0.9℉ Max # of Shelves 10 14 16 Shelves Included 3 3 3 Max. Load per Shelf 20Kg 20Kg 20Kg Timing Range 1~5999mins 1~5999mins 1~5999mins Internal Dimension (WxHxD) 15.8 x 17.7 x 15.0 inch 19.7 x 23.6 x 15.8 inch 23.6 x 27.6 x 23.6 inch External Dimension (WxHxD) 21.5 x 39.4 x 26.0 inch 26.0 x 45.3 x 27.0 inch 27.4 x 29.2 x 34.8 inch Net Weight 85Kg 100Kg 120Kg Electrical Requirement AC120V,60Hz AC120V,60Hz AC120V,60Hz Power 1300W 1500W 1700W 110V Cat. No. BLC15060U BLC150120U BLC150250U 220V Cat. No. BLC15060C BLC150120C BLC150250C FAQ Do the BIC Cooling Incubators have a port hole? Yes, there is a 1" port on the BIC cooling incubators.   Can you program a temperature ramp into the BIC Cooling Incubators? No. If you are using the programmability functions, the incubator will get to the setpoint temperature as quickly as possible then remain at that temperature for the duration of the cycle. If your application requires a refrigerated and heated incubator capable of performing temperature ramps, we suggest considering the BMT Friocell.