dAHLer Exhaust Flap / Valve Control Module With Remote Control for F & G series

What does the new IP68 rated waterproof dÄHLer Valve Controller mean?An IP68 rating, protects your dÄHLer Valve Controller (VC) from the harsh roadelements you will encounter with the upmost resiliency of protection! "IP"stands for Ingress Protection, and the numbers indicate the level of protectionagainst various elements. The "6" specifies complete protection against dust,keeping the VC internal components clean and safe. The "8" signifies that theVC can be submerged in water up to 1.5 meters (5 feet) deep for up to 30minutes without damage.Our VC is made from Polycarbonate UL 94 V0, the Standard for Safety ofFlammability of Plastic Materials for Parts in Devices and Appliances testing,which rated tests for flammability of plastic.V-0 burning stops within 10 seconds on a vertical specimen; drips of particlesallowed as long as they are not inflamed.Furthermore, our VC has an IK shock resistance level of 07, which correspondsto 2.0 joules. Briefly explained it can withstand an impact of 500g (1.1 lb) froma drop height of 40 cm (15.8''). In electrical engineering the IK shock resistancelevel refers to a measure of the resistance of components to impact and impactstress.In the world of modern technology, all these facts help to quickly distinguishbetween a cheap product and a high-quality one.WE MAKE THE DIFFERENCE!Developed in Switzerland and made in Germany using only Highest qualitytechnological components to give you a 3-year product guarantee.________________________________________________________________The VC has proven to cause no damage to the engine nor the vehicle. All of ourDahler products have been individually checked for function after assembly andsubjected to quality assurance. All modulars are made in Germany by a team ofspecialists at an ISO 9001:2015 certified facility. Our device is built to be safe from the ground up, so that it cannot interferewith the data bus.The dÄHLer VC modular is permanently resistant from up -30° to +80° C(-22° to 176° F). As a rule, you don’t need any additional heat protection. _________________________________________________________________The dÄHLer IP68-Rated Technology Valve Control Modular includeswiring harness, two 2-buton remote controls and works with all BMW andBMW M cars F and G series with a one or two stock exhaust valve, except theM2 Coupe F87 with the N55 engine manufactured between October 2015 andJune 2018FUNCTIONS:OPEN-ButonExhaust flaps stay permanently open until engine stopCLOSE-ButonTakes you back to original settingsEXTRA FEATURESEOP Mode (engine overheat protection)No permanent closing of the exhaust flapsMFM Mode (memory function mode)Memory function can be activated via the included remote control(The exhaust flap remains in the last position when the engine stops to enablethe vehicle to start with the flaps open) Our Exhaust Flap Control Module was developed and manufactured in Germany and is a must have if you like to control the sound of your car. With the device installed you can manually open and close the standard built-in exhaust flap of your BMW at any time. It operates at the push of a button on the in delivery included remote control or can be programmed to your mirror buttons, so the system will be very well integrated. Installation of our Exhaust Flap / Valve Control Module in your BMW is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done. The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle. With our smart Exhaust Flap / Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term. If BMW updates the computer software, our Exhaust Flap / Valve Control Module is not lost or overwritten. As our Exhaust Flap / Valve Control Module operates as minimally in the vehicle as necessary, it does not does not leave an error message. When your BMW goes to the BMW workshop for maintenance, no errors appear on the DIS machine. The dAHLer Exhaust Flap / Valve Control Module for the BMW is undetectable to plug-in diagnostic readers and it leaves no traces behind Our Exhaust Flap / Valve Control Module for your BMW vehicles are here to improve your driving experience with an awesome sound. The system has been checked and is it not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All Modules are made in Germany by a team of specialists at an ISO 91:215 certified facility. Exhaust Flap / Valve Control Module for the BMW is built to be safe from the ground up, so that it cannot interfere with the data bus. The Module is permanently resistant from up -3° to +8° C (-22° to 176° F). As a rule, you don’t need any additional heat protection. Works on ALL valved F and G series BMWs **DOES NOT WORK FOR M2 COUPE F87 1/215-6/218 w/ N55 ENGINE**