JYTOP CMS60C Portable Pulse Oximeter OLED Spo2 PR Monitor Alarm/Software
DESCRIPTION The CMS60C Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology in accordance with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for being used in hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising). Features Small in volume, light in weight and convenient in carryingEasy to operate, low power consumptionOperation menu for function settingsSpO2 value displayPulse rate value display, bar graph displayPulse waveform displayDisplay direction can be changedScreen brightness can be changedPulse rate sound indicationWith measured data overruns limits and low-voltage alarm function, the upper/lower alarm limit can be adjustedBattery capacity indicationLow-voltage indication: Low-voltage indication appears before working abnormal caused by low voltage.Data storage function, stored data can be uploaded to computerData transmission in real-timeExternal SpO2 probe Performance Display mode: 1.77" TFT color screenScreen resolution: 128*160SpO2 measuring range: 0%~100% (resolution is 1%)Accuracy: 70%~100%: ±2%, Below 70% unspecified.PR measuring range: 30bpm~250bpm (resolution is 1bpm)Accuracy: ±2bpm or ±2% (whichever is greater)Measurement performance in weak filling condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2bpm or ±2% (whichever is greater).Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Voltage: DC 3.6V~4.2VPower supply: 3.7V rechargeable lithium battery × 1Battery working hour: 26 hours in theoreticalBattery service life: no less than 500 times of charge and dischargeSafety type: Internally powered equipment, Type BF applied part Accessories Standard:◆User Manual 1pc （GB only）on request for other Language◆Lithium battery 1pc◆Power adapter 1pc◆Data line 1pc◆CD (PC software) 1pc◆Probe 1pcOptional:◆Other SpO2 probes Physical characteristic Dimension: 87(L) × 45(W) × 22(H) mmWeight: about 75g (with one lithium battery)