Mark-10 WT3-201 Manual Wire Crimp Pull Tester (Discontinued)

Limited stock, price shown is 15% off list. The Mark-10 WT3-201 is discontinued and replaced by Mark-10 WT205 Wire Crimp Pull Tester. The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]).  Features Measures real-time and peak force values Ergonomic lever operation produces 200 lbF [1,000 N] USB, RS-232, Mitutoyo (Digimatic), and analog outputs Automatic output / data storage / zeroing upon sample break helps automate testing processes 1,000-point data memory with statistics and outputs Password protection prevents unauthorized changes Programmable set point indicators and outputs for pass/ fail determination High-speed 7,000 Hz sampling rate accurately captures peak force values Configurable audio alarms and key tones Mounting holes for bench mounting Specifications Capacity x Resolution 200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1000 x 0.5 N, 1 x 0.0005 kN Accuracy ±0.2% of full scale Wire gauge range AWG30 – AWG3 Including insulation. To ensure the wire sample will fit into the WT3-201, measure the overall outside diameter of the insulated wire and check against the specified diameter range. Account for sample compressibility in making this determination. Wire diameter range 0.01 – 0.25 in [0.3 – 6.3 mm] Minimum sample length 6.5 in [165 mm], excluding termination Maximum sample elongation 1.15 in [29.2 mm] Power AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. Battery Life Backlight on: up to 7 hours of continuous useBacklight off: up to 24 hours of continuous use Sampling rate 7,000 Hz Outputs USB / RS-232: Configurable up to 115,200 baud. .Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices.Analog: ±1 VDC, ±0.25% of full scale at capacity.Set points: Three open drain lines. Safe overload 150% of full scale (display shows “OVER” at 110% and above) Weight 16.1 lb [7.3 kg] Warranty 3 years (see individual statement for further details) Included Items (1) Wire Pull Tester (1) Removable lever (1) USB cable (1) Battery (1) AC adapter (1) Resource CD (1) Certificate of calibration without data Dimensions - in [mm]