Lumintop FW3A Titanium + Copper Nichia 519a

  LUMINTOP FW3A TI + CU (TITANIUM + COPPER) NEW! Nichia 519A Emitters Approximate 1800-2000 Lumens!  2700k 3500k 4500k 5000k   SPECIFICATIONS: Emitter:   Three LEDs on a copper DTP MCPCB e.g.                 Cree XP-L HI CW, NW LED, Nichia 219CT, or Luminus SST20 LEDOptic:       Standard TIR OpticsFlux:        ~2800 lm (XP-L Hi)Intensity: ~12 500 cd ANSI throw ~200 m (XP-L Hi)Firmware: The FW3A uses free software called Andúril,                  distributed under the terms of the GPL v3. Code is available from                  http://tiny.cc/TKAndurilUser interfaces: [[1] By default the FW3A is set to use SMOOTH RAMPING.                  Instant access to TURBO mode is also provided.                  [2] A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.                  [3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power                  [4] MUGGLE mode uses a reduced output.                 [5] It has an electronic LOCKOUT for safety but acts also as momentary low light. Other                  functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher,                   candlelight, lightning stormBattery:  One flat-top or button-top 18650 cell. An unprotected cell is recommended. Max. length                  66mm. Cell is not included.Driver:    FET+7+1 driver. Low parasitic drain while OFFBody:     Titanium & CopperSwitch:   Electronic tail switchIngress rating: Equivalent to IPX8Weight:  Approximately 89 g without cellsSize:      25.5 mm Ø head x 92.5 mm length.