Emisar Noctigon Linear/Boost/Tint Ramping LED Driver

EMISAR/NOCTIGON LED DRIVERS NOTE: PLEASE READ BFORE PURCHASING! THESE DRIVERS ARE DESIGNED AND MADE TO USED IN HANK'S EMISAR/NOCTIGON LED FLASHLIGHTS, YOU MUST KNOW WHAT YOU ARE DOING BEFORE REPLACING OR TRYING TO MODIFIY YOUR FLASHLIGHT. 12V BOOST DRIVER'S REQUIRES SPECIFIC MCPCB (SOLD HERE) AND BE AWARE ON WHAT EMITTERS ARE USED AND IMPROPER FIRMWARE CAN OR WILL CAUSE DAMAGE TO YOUR EMITTERS (LED), TOYKEEPER'S LINK IS BELOW. ALL DRIVER'S ARE PRE-FLASHED WITH SPECIFIC FIRMWARE THE FET DRIVER'S WILL HAVE THE FET ENABLED. DRIVER'S ARE SOLD "AS IS" NO WARRANTY! IF YOU DON'T KNOW ASK!  IMPORTANT NOTE: ALL LINEAR + FET & TINT RAMP DRIVERS ARE DEFAULTED AT 9A REGULATED CURRENT IF YOU NEED TO LOWER OR INCREASE THE REGULATED CURRENT THERE IS A $5 CHARGE MOST Drivers will not have the wires soldered to it, I will send wires and you will need to solder it yourself! OR there is a $5 fee to solder the wires to the pads NEW! 18mm D3aa/DW3aa 9V 6A boost driver (TheFreeman) 22mm D4V2 2A linear +