Black on Neon Yellow Laserable ABS Sheet

These sheets have a plastic masking on the top side only. The back is not masked and may have minor scuffs and scratches. note: this material is 3-ply with a thin Black ABS cap (0.003 in), Clear acrylic core (0.052 in) and a Yellow ABS cap (0.003 in). The cutting depth is 0.003". Instructions for Engraving and Cutting 2 color ABS sheets Please note these are intended as ‘a starting point’ and adjustments in 5% increments may be needed to achieve optimal results. Engrave Settings: @ 40 power / 90 speed / 400 DPI Cut @ 30 power / 15 speed / 1000 hz. Bottom Up Engraving: Change the orientation of your laser to begin engraving from the bottom of the material upwards. This simple process will minimize the amount of residue being exhausted over previously engraved material which can re-deposit on the warm core and make clean up difficult. You can change the orientation of your laser to bottom up engraving from the advanced tab in your print driver. PPI Settings: Lowering the nu