ZOOZ ZEN17 Z-WAVE PLUS UNIVERSAL RELAY WITH 2 NO & NC RELAYS (20A, 10A) 800 SERIES

ZEN17 from ZOOZ provides 2 dry contact NO/NC relays up to 20A and 2 dry contact or 12-24v AC/DC inputs for a wide range of Z-Wave automation applications. Description 2 NO or NC relays to turn almost any load into a Z-Wave device (use either the normally closed or normally open relay for R1 and R2 at a time) 2 Dry Contact or 12-24 V inputs to monitor HVAC systems, magnetic door sensors, or analog leak alarms (use either dry contact or 12-24 V input for R1 and R2 at a time, never apply voltage to the Sw terminals Automate up / down DC motors in screens, awnings, motorized blinds Control sprinkler systems, commercial gates, garage doors (will NOT work with MyQ or other smart openers), pool pumps, whole-house fans, landscape lighting, and more NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range SmartStart and S2 authenticated security for a truly secure smart home Powered by USB C or 12-24 V (AC/DC): power supply NOT included (get it here) Use optional wall switches for manual control of connected devices Wall-mount ready  5-year warranty and lifetime tech support US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products) NOTE: Z-Wave gateway controller required - sold separately. Specifications Z-Wave Frequency: 908.42 MHz (US, CA, MX) Power: 12 - 24 V / USB C Maximum Load: NO relays: 20 A, NC Relays: 10 A Range: Up to 200 feet line of sight Powered by USB C or 12-24 V (AC/DC) Installation and Use: Indoor Only Operating Temperature: 32-104° F (0-40° C) Dimensions: 4" x 2.5" x 1.5" WORKS WITH: Z-Box Hub (recommended for Zooz products) ADT Pulse (no advanced settings) eedomus Ezlo Plus Fibaro Home Center 2 Fibaro Home Center Lite Home Assistant (Z-Wave JS) HomeSeer (3.0.6.0 release or higher) Hubitat (2.2.6 release or higher) Indigo ISY Jeedom SmartThings (register your product here to access the custom lua driver for full functionality) NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.