Long Distance 900 MHz Wireless Remote Control Switch Transmitter / Relay Receiver with Key fob Transmitters - 6 Miles

Long Distance 900 MHz Wireless Remote Control Switch Transmitter / Relay Receiver with Key fob Transmitters - 6 Miles Series: WPC900-XL-KF Features Wireless Bridge Between Key Fob Switch & Control Relays Up To 6 Miles (LOS) Transmit/Receive Distance Weatherproof NEMA 4X Rated Enclosures Use To Control Pump, Valve, Motor, Gate or Lighting Receiver Unit Features DPDT 10A Control Relays License Free Point-to-point Radio Operation Applications Pump or Motor Control Valve Activation Gate or Lighting Control Description Series WPC900-XL-KF Wireless Key Fob Switch/Control System provides a wireless bridge between a key fob switch and a control relay. When the included key fob switch is activated signals are sent via a license free radio signal to a transceiver unit mounted within 300 ft or less from the key fobs, the transceiver unit then send the same command to a long distance receiver unit up to 6 miles (Line-of-site) away. When the relay control box receives the proper wireless signal from the key fob transmitter/transceiver unit a control relay inside the receiver is energized to operate a pump, valve, gate or motor. Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter interface box or receiver can come from any external 12-14V DC power supply or battery. NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE. Note: Key fob switch transmitter must be within 300 feet of the Transmitter interface box when activated for proper operation. Max distance between Transmitter interface box and the relay Receiver box is 6 Miles. (with optional Yagi antennas) See diagram for example installation. Key Fob Switch Transmitter Specification Radio Frequency: 433 MhzControl Buttons: 2 or 4Max Transmit Distance: 300ft Transmitter Interface Box Specifications Radio Frequency: 900 MHzRF Power Output: 250mWRegulatory: FCC Part 15 (No license required)Control Lines: 2 or 4RF Output Impedance: 50 Ohm nominalRF Data Rate: 10 kbpsAntenna Connection: RP-SMAAntennas: 7dbi, Omni-directional (Included)Transmit/Receive Distance:with included antennas: Indoor/Urban 1000ft, Line-of-site 3 Mileswith optional antennas: Indoor/Urban 1600ft, Line-of-site 6 MilesTransmitter/Receiver Code Matching: Factory setWire Connection: Terminal BlocksOperating Temperature: -22 to 113 ºF (-30 to 45 ºC)Enclosure: NEMA 4X, PCT PlasticOperating Power 12-14V DC @ 3W max Relay Receiver Specifications Receive Sensitivity: -110 dBmOperating Power: 12-14V DC @ 3W maxControl Output: 10 Amp, 120/240V DPDT Relays Regulatory ApprovalsFCC(USA) - MCQ-XB900HPIC (Canada) - 1846A-XB900HP Available Models  Model No. Description Control Lines WPC900-XL-KF-SW2-RC2 Industrial 900 MHz Wireless 2-Line Remote Control Transmitter/Receiver Set with Key Fobs. 2 WPC900-XL-KF-SW4-RC4 Industrial 900 MHz Wireless 4-Line Remote Control Transmitter/Receiver Set with Key Fobs 4 Extra or Replacement key fobs are available. Each Transmitter/Receiver Set includes 2 key fobs, standard antennas, 6ft. antenna extension cables and manual.