10097 by Midland | SAE 45° Flare Fitting | Copper Bonnet | 3/8"

Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared. SAE Rating: SAE# 010114 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards). Vibration: Good resistance - use long nut when greater vibration resistance is required. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free Working Pressure Ranges: Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing: Assembly Instructions: 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square. 2) Slide nut on tube. Threaded end "A" of nut must face out. 3) Flare end of tube with a 450 flaring tool. A) Measure flare diameter B) Examine flare for excessive thin out. 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight. 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn. Note: Do not over-torque as it may damage the fitting or split the tubing at the flare. Tube OD 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14 Crossover Series: 464 B1 3GF 64C 57 156 FB 695 464 Part Number Size A B Approx. Weight(Lbs.) 10094(10-094) 3/16" 0.16" 0.31" 0.01 10095(10-095) 1/4" 0.22" 0.36" 0.01 10097(10-097) 3/8" 0.34" 0.55" 0.01 10098(10-098) 1/2" 0.41" 0.66" 0.01 10099(10-099) 5/8" 0.44" 0.77" 0.01 10100(10-100) 3/4" 0.56" 0.95" 0.01