Peavey PVXp 10, Bluetooth Powered Loudspeaker - 10-Inch

The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet, and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4" inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator that can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. Full-coverage heavy-duty perforated steel grilles, with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals. Product Specifications: Powered: Yes Power Configuration: Bi-amped Channels: 3-channel mixer LF Driver Size: 10" woofer HF Driver Size: 1" Compression Driver LF Driver Power Amp: 400W HF Driver Power Amp: 120W Total Power: 520W (peak) Inputs: 2 x XLR-1/4" combo, 1 x 1/8" TRS Outputs: 1 x XLR Bluetooth: Yes (audio in) Frequency Range: 52Hz-20khz Frequency Response: 65Hz-20 kHz-(±3 dB) Crossover Frequency: 24dB/octave @ 2000 Hz Maximum Peak SPL: 123dB SPL @ 1m Horizontal Coverage Angle: 100° Vertical Coverage Angle: 60° Signal Processing: DSP, 24bit/48kHz Software: PVXp iOS app Enclosure Material: Black injection-molded plastic Mounting Options: Pole, Floor Wedge Power Source: Standard IEC AC cable Height: 20" Width: 12.69" Depth: 11.06" Weight: 27 lbs. .iframe-container{ position: relative; width: 100%; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; }