HO Scale Mohawk Adirondack and Northern Alco C425 White Cab Sub Lettering Decal Set

1. Make sure your models’ surface is clean and free of any dust. Ensure the model has a high gloss finish applied. 2. Cut out the decal, cut as close to the graphics as possible to reduce the chances of seeing the clear deal film upon finishing. 3. Apply a small amount of water and or Micro Set to the model surface.4. Soak the cut-out decal in warm distilled water for 20-30 seconds, or until the decal starts to remove itself from the backing paper. (The time for this will vary, in some cases will only need 10 seconds and others will need significantly longer). Don’t let the decal remove entirely from the paper as the paper is needed to transfer the decal to the model.5. Remove the decal from the water and place on the model, this can be done with your fingers/ hobby knife or tweezers, just be sure to be gentle while sliding the decal from the paper to the model. 6. Once you are happy with the location of the decal take a paper towel, soft paintbrush or a Q-tip and gently press th